Talk to an Expert: 866-333-0728
No bots. No guesswork. Real experts.

Lift Equipment for Mobile Lifts, Stackers and Carts

CustomMHS.com carries a full line of mobile lift equipment from leading manufacturers, including Logitrans, Lift Products, Autoquip, Presto Lifts, and Wesco. Each unit is engineered for safer handling, smoother transfers, and consistent load positioning, with options ranging from light-duty manual stackers to fully powered drive units with lift heights exceeding 130 inches. These manufacturers are recognized throughout the material handling industry for rugged, reliable mobile lifting equipment that withstands daily use across work cells, staging areas, and packing lines. Every unit purchased through CustomMHS.com is backed by the manufacturer's warranty.

Mobile lift equipment allows operators to raise, position, and transport loads at the point of work rather than relying on fixed lifting stations. The right mobile lift reduces manual handling, improves ergonomics, and keeps material moving smoothly across work cells, staging areas, packing lines, and assembly stations.

CustomMHS carries manual and powered options across scissor lift carts, pallet trucks, stackers, skid lifts, tilters, and rotators, from light-duty manual units to fully powered drive stackers with lift heights exceeding 130".


Selecting the Right Type:

♦ Power source: choose manual for lower-frequency lifting or battery-powered for high-frequency or heavier loads.
♦ Application: choose Stackers for vertical lifting, Skid Lifts or Pallet Trucks for horizontal transport, and Rotators or Tilters for repositioning loads during handling.
♦ Environment: choose Stainless Steel models for washdown, food, or pharmaceutical environments requiring corrosion resistance.


Where Commonly Used:

♦ Work Cells and Assembly Stations: mobile lifts position and transport loads at the point of work.
♦ Staging and Packing Lines: scissor lift carts and stackers reduce manual handling and bending.
♦ Wash-Down and Sanitary Facilities: stainless steel models support food and pharmaceutical environments.
♦ Reel and Coil Handling: reel rotators and lifters support safe, efficient wire and cable operations.


CustomMHS carries the full line of mobile lift equipment from Logitrans, Presto Lifts, Wesco, Autoquip, and Lift Products, backed by each manufacturer's warranty.

Wesco Folding Handle Manual Scissor Lift Table Cart Wesco Folding Handle Manual Scissor Lift Table Cart Wesco folding handle manual scissor lift table carts. Handle folds flat for compact storage. 330, 660, or 1,100 lb capacity. Platform sizes 17.75" x 27.5" to 20" x 32". Lift heights from 8.5" to 35". Foot pump, chrome-plated, View All → Wesco Platform Hydraulic Stacker | 1,000 lb, Two Platform Sizes Wesco Platform Hydraulic Stacker Wesco platform hydraulic stackers. 1,000 lb capacity. 24"x24" or 32"x30" platform. Raised heights 60", 68", or 80". Lowers to 5.75". Foot-pedal raise/lower. Floor locks, safety screen, floor guard standard. One-piec View All → Industrial Powered Stackers | Electric Pallet Lifting Solutions Industrial Powered Stackers Increase efficiency and reduce strain in your warehouse with industrial powered stackers. Available in walkie, straddle, and counterbalanced styles with capacities up to 4,000 lbs and lift heights over 15 feet. Ideal for pallet handling, stacking, and erg View All → Lift Products ML15A Adjustable Tilt Work Positioner Lift Products ML15A Adjustable Tilt Work Positioner Optimize workstation ergonomics with the Lift Products ML15A Adjustable Tilt Work Positioner. This pneumatic lift table offers a 330 lb capacity, adjustable height from 20" to 27.5", and a 0°–40° tilting platform, enhancing productivity and redu View All → Presto-Lift Battery Powered Container Tilter | Ergonomic Bin & Tote Positioning Presto-Lift Battery Powered Container Tilter The Presto-Lift Battery Powered Container Tilter improves ergonomic access to bins, totes, and containers by positioning loads at comfortable working angles. With easy push-button operation, a 12V battery system, and up to 4,000 lb capacity, it enhances p View All → Wesco Battery-Powered Platform Powered Stacker, 24" x 24" or 32" x 30" Platform Wesco Battery-Powered Platform Powered Stacker, 24" x 24" or 32" x 30" Platform Wesco platform powered stacker. Battery and charger included. 1,000 lb capacity. 24"x24" or 32"x30" steel platform. Lowers to 5.75". Raised heights 60", 68", or 80". 5" phenolic front wheels, 4" rear caste View All → Wesco Deluxe Lowboy Pallet Truck Wesco Deluxe Lowboy Pallet Truck Wesco Deluxe Lowboy Pallet Truck. 2.125" lowered height for low-clearance pallets and skids. 5,500 lb capacity. Overload bypass. 5-year pump warranty. 8-gauge reinforced forks. 210° steering. 6" moldon polyurethane steer wheels. 21" or 27&q View All → Wesco Fixed Handle Manual Scissor Lift Table Cart Wesco Fixed Handle Manual Scissor Lift Table Cart Wesco fixed handle manual scissor lift table carts. 19.5" x 32" platform. 700 or 1,000 lb capacity. Lift range 14" to 35". Foot pump, spring-loaded release lever, 5" polyurethane casters with locking swivel. Authorized distributor View All → Wesco Straddle Fork Hydraulic Stacker – 1,000 lb Capacity | 56"–76" Lift Heights Wesco Straddle Fork Hydraulic Stacker Wesco straddle fork hydraulic stackers. 1,000 lb capacity. 1" thick x 3" wide x 30" long floor-touch forks, adjustable span to 25". Raised heights 56", 64", or 76". Base leg span 25.5" ID, 32" OD. Floor locks, View All → Presto Lifts Hydraulic Post Lift Table Presto Lifts Hydraulic Post Lift Table The Presto Lifts Hydraulic Post Lift Table offers smooth, vertical lifting for loads up to 2,000 lbs. Foot pump operation, tip-toe release, and dual floor locks for stability. Authorized distributor. View All → Presto-Lift Industrial AC Electric Stackers Presto-Lift Industrial AC Electric Stackers Presto-Lift AC electric stackers. Corded 1 HP 115V AC motor. Mobile and stationary configurations. Raised heights from 50" to 130". Adjustable solid steel forks. 4' to 20' remote control cord. Heavy-duty floor lock. Optional slip-on platform. Au View All → Steel Frame Winch & Foot Pedal Manual Stacker Steel Frame Winch & Foot Pedal Manual Stacker Steel frame manual stacker with winch and foot pedal operation for controlled lifting and easy horizontal storage/transportation. A practical, space-saving solution for portable material handling in warehouses, maintenance areas, and light industrial sett View All →

Frequently Asked Questions (FAQs)

What is mobile lift equipment used for?

Mobile lift equipment is used to safely raise, position, and transport materials, pallets, or loads within warehouses, manufacturing facilities, and industrial workspaces.

What types of mobile lift equipment do you offer?

We offer a range of lift solutions, including lift tables, material lifts, mobile stackers, scissor lifts, and other portable lifting equipment designed for industrial use.

How do I choose the right lift capacity for my application?

Lift capacity depends on the weight of your load, how high it needs to be raised, and how frequently the equipment will be used. Always select a unit rated above your typical working load.

Are these lifts manual or powered?

Both options are available. Some mobile lifts are operated manually, while others are electric or powered for higher capacity applications and improved productivity.

Is mobile lifting equipment designed for workplace safety?

Yes. These products are built to reduce strain, prevent injuries, and improve material handling safety when moving or lifting heavy loads.

Is the manufacturer’s warranty included with my purchase?

Yes. All products sold on CustomMHS.com include the original manufacturer’s warranty unless otherwise noted. Custom MHS is an authorized dealer for the brands we carry, which means your purchase is covered by the manufacturer's full factory warranty.

Do you ship nationwide?

Yes. We ship throughout the United States and Canada using trusted freight partners experienced in handling industrial equipment. Our team coordinates shipping details to ensure safe and efficient delivery.

Built for Manufacturers, Warehouses &
Industrial Facilities

CustomMHS is an authorized distributor of industrial storage and material handling equipment for manufacturers, warehouses, distribution centers,
and industrial facilities across North America. From shelving systems and pallet racking to storage containers, workbenches, carts, security fencing, and cabinets,
we carry industrial-grade brands and help you choose the right specs, load ratings, and configuration for your facility, workflow, and space before you order.