Talk to an Expert: 866-333-0728
No bots. No guesswork. Real experts.

Lift Equipment for Mobile Lifts, Stackers and Carts

CustomMHS.com carries a full line of mobile lift equipment from leading manufacturers, including Logitrans, Lift Products, Autoquip, Presto Lifts, and Wesco. Each unit is engineered for safer handling, smoother transfers, and consistent load positioning, with options ranging from light-duty manual stackers to fully powered drive units with lift heights exceeding 130 inches. These manufacturers are recognized throughout the material handling industry for rugged, reliable mobile lifting equipment that withstands daily use across work cells, staging areas, and packing lines. Every unit purchased through CustomMHS.com is backed by the manufacturer's warranty.

Mobile lift equipment allows operators to raise, position, and transport loads at the point of work rather than relying on fixed lifting stations. The right mobile lift reduces manual handling, improves ergonomics, and keeps material moving smoothly across work cells, staging areas, packing lines, and assembly stations.

CustomMHS carries manual and powered options across scissor lift carts, pallet trucks, stackers, skid lifts, tilters, and rotators, from light-duty manual units to fully powered drive stackers with lift heights exceeding 130".


Selecting the Right Type:

♦ Power source: choose manual for lower-frequency lifting or battery-powered for high-frequency or heavier loads.
♦ Application: choose Stackers for vertical lifting, Skid Lifts or Pallet Trucks for horizontal transport, and Rotators or Tilters for repositioning loads during handling.
♦ Environment: choose Stainless Steel models for washdown, food, or pharmaceutical environments requiring corrosion resistance.


Where Commonly Used:

♦ Work Cells and Assembly Stations: mobile lifts position and transport loads at the point of work.
♦ Staging and Packing Lines: scissor lift carts and stackers reduce manual handling and bending.
♦ Wash-Down and Sanitary Facilities: stainless steel models support food and pharmaceutical environments.
♦ Reel and Coil Handling: reel rotators and lifters support safe, efficient wire and cable operations.


CustomMHS carries the full line of mobile lift equipment from Logitrans, Presto Lifts, Wesco, Autoquip, and Lift Products, backed by each manufacturer's warranty.

Lift Products Maxx-Jack MJ55 Pallet Truck Lift Products Maxx-Jack MJ55 Pallet Truck Lift Products Maxx-Jack MJ55 manual pallet truck. 5,500 lb capacity. 48" long forks, 2.9" to 8" travel. Gusseted forks with entry/exit rollers. Built-in overload valve. Adjustable push rods. 7" dual nylon casters. 20.5" or 27" View All → Lift Products Maxx-Mini Lifter – Compact Electric Lift for Ergonomic Material Handling Lift Products Maxx-Mini Lifter Enhance your material handling efficiency with the Lift Products Maxx-Mini Lifter. This compact, battery-operated lift offers a 660 lb capacity, 58" vertical travel, and adjustable forks, making it ideal for tight spaces and various applications like View All → Lift Products Maxx-Mini PM120 Stacker – 250 lb Manual Mini Stacker Lift Products Maxx-Mini PM120 Stacker Enhance your material handling efficiency with the Lift Products Maxx-Mini PM120 Stacker. This compact manual stacker offers a 250 lb capacity, 41" lift height, adjustable forks, and a mechanical hand crank, making it ideal for workbench loading, mac View All → Lift Products Maxx-Mobile Manual Tilt Table Lift Products Maxx-Mobile Manual Tilt Table Enhance workplace efficiency with the Maxx-Mobile Manual Tilt Table by Lift Products. Designed for ergonomic material handling, this tilt table reduces worker strain and improves productivity. Ideal for tilting totes, boxes, and containers up to 2,000 lbs View All → Lift Products MJHLE Maxx-Jack Electric High Lift Lift Products MJHLE Maxx-Jack Electric High Lift Lift Products MJHLE Maxx-Jack electric high lift skid lifter. 2,200 lb capacity. 3.25" to 31.5" travel. 12V battery, push-button handle controls. Auto floor lock above 11". Optional slide-on platform and remote control. Narrow or wide fork View All → Lift Products MJHLE-SS Stainless Steel Electric High Lift Lift Products MJHLE-SS Stainless Steel Electric High Lift Enhance material handling in hygienic environments with the Lift Products MJHLE-SS Stainless Steel Electric High Lift. Featuring a 2,200 lb capacity, 316 stainless steel construction, and a 12V DC electric lift system, it's ideal for pharmaceutical, food, View All → Lift Products ML15B Adjustable Tilt Work Positioner Lift Products ML15B Adjustable Tilt Work Positioner Optimize workplace ergonomics with the Lift Products ML15B Adjustable Tilt Work Positioner. This pneumatic lift table offers a 330 lb capacity, adjustable height from 28.35" to 42", and a 0°–40° tilting platform, enhancing productivity and reduc View All → Lift Products MML-PSS Manual Stainless Steel Scissors Lift Cart Lift Products MML-PSS Manual Stainless Steel Scissors Lift Cart Lift Products MML-PSS stainless steel manual scissors lift carts. Passivated stainless for washdown and corrosive environments. 400, 800, or 1,000 lb capacity. Single and double scissor. Lift heights from 9" to 53". Upper lift limit bypass. Auth View All → Lift Products MMLA Linear Actuated Lift Carts Lift Products MMLA Linear Actuated Lift Carts Lift Products MMLA linear actuated lift carts. Hydraulic-free electric lift with pendant control. No oil leaks, no vertical drift. 330 or 550 lb capacity. Lifts from 14" to 50.4". Non-marking medical casters. Suited for cleanrooms, assembly, and View All → Lift Products MMTL-10E Maxx-Mobile Tilt & Lift – 2,200 lb Electric Tilter Lift Products MMTL-10E Maxx-Mobile Tilt & Lift Enhance your material handling efficiency with the Lift Products MMTL-10E Maxx-Mobile Tilt & Lift. This battery-powered unit offers a 2,200 lb capacity, 90° tilt, and 11" vertical lift, providing ergonomic solutions for various industrial applica View All → Lift Products MXEM Powered Walkie Stacker Lift Products MXEM Powered Walkie Stacker Lift Products MXEM powered walkie stacker. Electric lift, manual push. 2,200 lb capacity. 3.5"x42" adjustable forks, adjustable straddle legs. 12V battery with integral charger and ammeter. Foot floor lock, operator safety screen, 7.75" phe View All → Lift Products MXSA Manual Straddle Stacker | 2,200 lb Capacity Ergonomic Pallet Lifter Lift Products MXSA Manual Straddle Stacker The Lift Products MXSA Manual Straddle Stacker offers a 2,200 lb capacity with a 62" lift height, featuring adjustable forks and straddle legs, dual pump operation, and an ergonomic handle—ideal for light-duty pallet handling and stacking in tight wa View All →

Frequently Asked Questions (FAQs)

What is mobile lift equipment used for?

Mobile lift equipment is used to safely raise, position, and transport materials, pallets, or loads within warehouses, manufacturing facilities, and industrial workspaces.

What types of mobile lift equipment do you offer?

We offer a range of lift solutions, including lift tables, material lifts, mobile stackers, scissor lifts, and other portable lifting equipment designed for industrial use.

How do I choose the right lift capacity for my application?

Lift capacity depends on the weight of your load, how high it needs to be raised, and how frequently the equipment will be used. Always select a unit rated above your typical working load.

Are these lifts manual or powered?

Both options are available. Some mobile lifts are operated manually, while others are electric or powered for higher capacity applications and improved productivity.

Is mobile lifting equipment designed for workplace safety?

Yes. These products are built to reduce strain, prevent injuries, and improve material handling safety when moving or lifting heavy loads.

Is the manufacturer’s warranty included with my purchase?

Yes. All products sold on CustomMHS.com include the original manufacturer’s warranty unless otherwise noted. Custom MHS is an authorized dealer for the brands we carry, which means your purchase is covered by the manufacturer's full factory warranty.

Do you ship nationwide?

Yes. We ship throughout the United States and Canada using trusted freight partners experienced in handling industrial equipment. Our team coordinates shipping details to ensure safe and efficient delivery.

Built for Manufacturers, Warehouses &
Industrial Facilities

CustomMHS is an authorized distributor of industrial storage and material handling equipment for manufacturers, warehouses, distribution centers,
and industrial facilities across North America. From shelving systems and pallet racking to storage containers, workbenches, carts, security fencing, and cabinets,
we carry industrial-grade brands and help you choose the right specs, load ratings, and configuration for your facility, workflow, and space before you order.