Pucel Double Door Industrial Storage Cabinet

Pucel double-door industrial storage cabinets are built for applications where shelf capacity is the primary selection driver. At 1,000 lb per shelf across all four shelves, these cabinets handle significantly heavier loads than standard industrial cabinets -- making them suited to die storage, heavy tooling, dense parts inventory, and other applications where shelf deflection and structural fatigue are concerns at lower rated capacities.

All models ship fully assembled with all-welded steel construction, keyed locking handles with two keys included, and four internal shelves. Two widths are available (36" and 48") and two depths (19" and 24"), all at 72" tall.

Models and Specifications:

♦ HDSC-3672-19-4-DD: 36" wide x 19" deep x 72" tall. 4 shelves. 1,000 lb per shelf.

♦ HDSC-3672-24-4-DD: 36" wide x 24" deep x 72" tall. 4 shelves. 1,000 lb per shelf.

♦ HDSC-4872-19-4-DD: 48" wide x 19" deep x 72" tall. 4 shelves. 1,000 lb per shelf.

♦ HDSC-4872-24-4-DD: 48" wide x 24" deep x 72" tall. 4 shelves. 1,000 lb per shelf.

Selecting the Right Model:

♦ Width, 36" vs. 48": The 36" wide models fit in tighter wall runs and narrower bay positions. The 48" wide models provide more shelf surface per unit and suit applications where fewer, wider cabinets are preferred over a run of narrower ones.

♦ Depth, 19" vs. 24": The 19" depth minimizes the front-to-back footprint for positions with limited room clearance. The 24" depth accommodates deeper items, larger dies, and equipment that needs more interior space on the shelf.

♦ 1,000 lb per shelf: Four shelves at 1,000 lb each provide substantial total storage capacity in a single cabinet footprint. This is the appropriate selection when the items being stored are heavy enough to exceed the rated capacities of 200, 300, or 400-lb cabinets, or when long-term shelf performance under repeated heavy loading is required.

♦ Keyed locking with two keys included: Provides controlled access in shared environments. Keys are included with the cabinet, and additional keys can be ordered if needed for multi-user environments.

Where Commonly Used:

♦ Die and Tooling Storage: Storing heavy dies, punches, and associated tooling on shelves that can handle the full weight without deflection, in a locked cabinet that keeps the inventory organized and secured when not in use.

♦ Heavy Spare Parts Inventory: Keeping large, heavy mechanical components, gearboxes, motors, and other substantial replacement parts organized in a locked cabinet adjacent to the equipment they support.

♦ Production Supplies and Mold Storage: Storing injection molds, forming dies, and production tooling in a heavy-duty locked cabinet where the 1,000 lb per shelf capacity accommodates the weight of typical production tooling without structural concerns.

♦ Maintenance Shops with Heavy Inventory: A maintenance department storing large wrenches, hydraulic tools, gear pullers, and other heavy equipment in a single organized locked cabinet rather than scattered across open shelving.

♦ Pass-Through Tool Dispensing (if applicable): If these are front-and-rear access cabinets, they can serve as pass-through dispensing points between two adjacent work areas, allowing workers on either side to access the same cabinet without needing to walk around.

CustomMHS is an authorized Pucel distributor. All purchases include the manufacturer's factory warranty.