Cantilever Racks for Lumber, Pipe & Long Materials
Cantilever Racks for Lumber, Pipe & Long Materials
Cantilever racking is the correct rack style for long, awkward, or irregular materials that don't fit standard pallet racking: lumber, sheet goods, bar stock, pipe, tubing, and coil. Open-front arms extend from a central column, so material loads and unloads from the side without navigating around cross beams, and the rack itself can be sized to any length by adding upright and arm sections.
CustomMHS carries MECO Pre-Configured Cantilever Racking in Series 1000 (medium-duty) and Series 4000 (heavy-duty) for straightforward ordering, or you can build a custom system from individual components across Series 1000, 2000 (medium heavy-duty), and 4000.
Product Lines Available:
Pre-Configured Systems
♦ MECO Series 1000 Cantilever Rack, Single or Double Sided, Starter and Add-On Units, medium-duty
♦ MECO Series 4000 Cantilever Rack, Single or Double Sided, Starter and Add-On Units, heavy-duty
Build Your Own: Series 1000 (Medium-Duty)
♦ Single-Sided Uprights, accessed from one side only
♦ Double-Sided Uprights, supports back-to-back configurations
♦ Upright Brace Sets
♦ Straight Arms, for uniform materials like lumber and bar stock
♦ Inclined Arms, for round stock like pipe and coil
Build Your Own: Series 2000 (Medium Heavy-Duty)
♦ Single-Sided Uprights, accessed from one side only
♦ Double-Sided Uprights, supports back-to-back configurations
♦ Upright Brace Sets
♦ Straight Arms, for uniform materials like lumber and bar stock
♦ Inclined Arms, for round stock like pipe and coil
Build Your Own: Series 4000 (Heavy-Duty)
♦ Single-Sided Uprights, accessed from one side only
♦ Double-Sided Uprights, supports back-to-back configurations
♦ Upright Brace Sets
♦ Straight Arms, for uniform materials like lumber and bar stock
♦ Inclined Arms, for round stock like pipe and coil
Selecting the Right Model:
♦ Duty rating, choose Series 1000 for medium-duty, Series 2000 for medium heavy-duty, or Series 4000 for heavy-duty storage needs.
♦ Upright configuration, choose Single-Sided for wall-mounted racks or Double-Sided for back-to-back storage in open floor space.
♦ Arm style, choose Straight Arms for uniform materials, or Inclined Arms for round stock that could roll off a level arm.
Where Commonly Used:
♦ Lumber Yards and Building Supply, straight arms support sheet goods and dimensional lumber.
♦ Pipe and Tubing Distributors, inclined arms prevent round stock from rolling off the rack.
♦ Metal Distributors, cantilever racking supports bar stock and structural steel storage.
♦ Warehouses with Long or Irregular Materials, open-front arms allow side loading without cross beam obstructions.
CustomMHS carries the full line of MECO cantilever racking, backed by the manufacturer's warranty.