Industrial Equipment Experts Since 1980 | Mon–Fri, 7 AM–6 PM ET
No bots. Real experts. 866-333-0728
Get a Fast Quote
Get a Fast Quote

CustomMHS Buyer's Guide

How to Choose a Self-Dumping Hopper: Capacity, Gauge and Forklift Fit

A hopper has a volume rating and a weight rating, and your material decides which one runs out first. Here is how to size it and match it to your forklift.

Written and reviewed by: Tom McGovern, owner of CustomMHSPublished: November 2026Covers: Jesco · MECO · VestilQuestions: 866-333-0728
Section One

How do you choose a self-dumping hopper?

Three questions: how heavy, how much, and what lifts it.

Short answer: Choose the duty class by the weight of a full load, the size by the volume you generate, and then confirm your forklift can carry the loaded hopper at its load center.

Quick answers
  • Weight capacity: Medium duty is 2,000 lb, heavy duty is 4,000 lb, extra heavy duty is 4,000 to 6,000 lb.
  • Volume: From 1/4 to 5 cubic yards.
  • Gauge: 12 gauge body on medium duty, 10 gauge on heavy duty, 7 gauge on extra heavy duty. Lower numbers are thicker.
  • Forklift fit: Loaded hopper weight at a 24 in. load center has to be inside the truck's rating.

A self-dumping hopper rides on the forks. The operator releases a latch from the seat, the body rolls forward and dumps, and it relatches by itself. The buying decision is mostly arithmetic.

A note on this guide

This guide is written from published manufacturer data and my own experience quoting this equipment. It is general guidance and my opinion, not engineering advice. Confirm the rating for your exact model and application before you order.

Section Two

Capacity: pounds and cubic yards

Every hopper has both ratings. One will limit you before the other.

Short answer: Full weight equals cubic yards times density. If that is under the weight rating, you run out of volume first. If it is over, you run out of weight first.

Loose density of common materials, and the weight of 2 cubic yards
MaterialPounds per cubic yardWeight in a 2 cu yd hopper
Corrugated cardboard, flattened100 to 106200 to 212 lb
Wood, pallets and clean lumber169338 lb
Mixed waste, uncompacted250 to 300500 to 600 lb
Glass bottles, loose380760 lb
Metal scrap9061,812 lb
Concrete, scrap, loose1,8553,710 lb
Soil, dry2,0254,050 lb
Stone or gravel2,6325,264 lb

Worked example: cardboard

2 cu yd x 100 lb = 200 lb. That is about 10 percent of a 2,000 lb medium duty rating. You will fill the hopper long before you overload it, so buy for volume and get the biggest body that fits the space.

Worked example: gravel

2 cu yd x 2,632 lb = 5,264 lb, which is more than two and a half times a 2,000 lb rating. Usable fill is 2,000 / 2,632 = 0.76 cu yd, or about 38 percent full. Here you buy for weight: a smaller, heavier-duty hopper.

Material not on the list?

Fill a container of known volume, weigh it and scale up. Weigh wet material wet.

Section Three

Gauge and duty class

Steel thickness follows the weight rating.

Short answer: Medium duty is 12 gauge, heavy duty is 10 gauge and extra heavy duty is 7 gauge. Bases are heavier than bodies.

Duty classes
ClassCapacityBodyBaseVolume
Medium duty2,000 lb12 gauge7 or 8 gauge, or 1/4 in.1/4 to 4 cu yd
Heavy duty4,000 lb10 gauge7 or 8 gauge, or 1/4 in.1/4 to 4 cu yd
Extra heavy duty4,000 to 6,000 lb7 gauge8 gauge to 1/4 in.1/4 to 5 cu yd
Large volume super heavy6,000 lb7 gauge1/4 to 3/8 in.3 to 5 cu yd
Low profile2,000 to 5,000 lb12 or 7 gauge7 or 8 gauge, or 1/4 in.2-1/2 to 3-1/2 cu yd

Gauge is about abuse as much as weight. Light, bulky trash is easy on a 12 gauge body. Castings, stampings and demolition debris dropped from a height dent it. If the material is dense or abrasive, or gets thrown in, go up a class even when the weight rating would allow the lighter one.

Browse by class: medium duty, heavy duty and extra heavy duty.

Section Four

Forklift fit

The hopper is an attachment. The truck has to be rated for it.

Short answer: Add the hopper's empty weight to the load and check the total against your forklift's capacity at the load center.

Forklift capacity is rated at a load center, commonly 24 in. from the fork face. Capacity falls as the load center moves out. The standard derating is rated capacity times rated load center divided by actual load center. A truck rated 3,000 lb at 24 in. carries 2,400 lb at 30 in. and 2,000 lb at 36 in.

A large hopper is deep, and its contents shift forward as it dumps. Ask for the hopper's empty weight and overall depth on the model you are considering, and check the total against your truck's data plate with room to spare.

  • Attachment approval. Additions that affect capacity need the truck manufacturer's written approval, and the data plate has to be updated. OSHA 1910.178(a)(4).
  • Marking. The truck must be marked for the attachment with the combined weight at maximum elevation. OSHA 1910.178(a)(5).
  • Fork pockets. Measure your fork width, thickness and length and confirm them against the hopper's fork pockets before you order. Pocket sizes are not published on every listing, so ask.
Section Five

Features and choosing by application

Options that solve specific problems.

Short answer: Pick the dump style, loading height and accessories by the material.

Cardboard, plastic, light trash
Medium duty, largest volume that fits.
Mixed plant scrap, wood, banding
Heavy duty.
Castings, stampings, concrete, stone
Extra heavy duty, sized by weight.
Sticky, wet or clinging material
90 degree dump, which rotates further to clear the body.
Loading by hand or from a low machine
Low profile, for a lower loading height.
Machining chips and turnings
Chip trucks, 1,500 to 2,000 lb.
Wet material or coolant
Drain plug, and a lid if it travels.
Hopper is repositioned without a forklift
Heavy duty casters.
No forklift in the area
A tilt truck instead. See our hoppers and tilt trucks guide.
Section Six

Common mistakes

All avoidable with a scale and a tape measure.

Short answer: The usual error is buying by cubic yards for a material that should be bought by pounds.

  • Sizing dense material by volume. Two yards of gravel is 5,264 lb.
  • Buying heavy duty for cardboard. Light material fills the body at a fraction of its rating. Buy more volume, not more duty.
  • Forgetting the hopper's own weight on the forks. Add the empty hopper to the load.
  • Ignoring load center. Deep hoppers move the load center out.
  • Traveling with the hopper raised. OSHA 1910.178(o)(6) prohibits tilting elevated loads except to pick up or deposit. Travel with the hopper low.
Section Seven

Frequently asked questions

The questions I hear most on quote calls.

What size self-dumping hopper do I need?

Multiply the cubic yards you generate by the material's density. If the result is under the weight rating, size by volume. If it is over, size by weight.

What is the difference between medium, heavy and extra heavy duty hoppers?

Medium duty is rated 2,000 lb with a 12 gauge body. Heavy duty is 4,000 lb with a 10 gauge body. Extra heavy duty is 4,000 to 6,000 lb with a 7 gauge body.

What gauge steel is a self-dumping hopper?

Bodies are 12 gauge on medium duty, 10 gauge on heavy duty and 7 gauge on extra heavy duty. Bases run from 8 gauge to 3/8 in. plate.

How does a self-dumping hopper dump?

The operator releases a latch from the forklift seat by cable or lever. The body rolls forward, dumps and relatches automatically.

Will my forklift handle a self-dumping hopper?

Add the hopper's empty weight to the load and compare the total with your truck's capacity at the load center, commonly 24 in. Capacity falls as the load center moves out.

How much does a cubic yard of scrap metal weigh?

Loose metal scrap is listed at about 906 lb per cubic yard, so 2 cubic yards weighs about 1,812 lb.

About the author. Tom McGovern is the owner of CustomMHS, an industrial material handling distributor serving the US, Canada and Mexico. He has worked in material handling since 1981 and has quoted and specified the medium duty, heavy duty and extra heavy duty self-dumping hoppers sold at CustomMHS. Questions about this guide: 866-333-0728.

Ready for a quote?

Send us these details and a material handling specialist will reply, typically within one business day.

  • Dimensions
    Size of the load and the space it goes in
  • Load
    Weight per item, shelf or level
  • Quantity
    How many units you need
  • Delivery ZIP code
    For freight pricing
  • Drawing
    A sketch, photo or spec sheet, if you have one
Get a Fast Quote Call 866-333-0728

Want us to size the hopper?

Tell us the material, how much you make per shift, and your forklift's rated capacity, and we will match the duty class and size. Quote requests are answered within 24 hours by a real person.

866-333-0728

Browse self-dumping hoppers at custommhs.com

Get a fast quote

No bots. No guesswork. Real experts.

Specification sources

CustomMHS hoppers and tilt trucks guide and Jesco, MECO and Vestil listings · OSHA 29 CFR 1910.178.

Published figures are current as of November 2026 and are subject to change by the manufacturer. This guide is written from published manufacturer data and my own experience quoting this equipment. It is general guidance and my opinion, not engineering advice. Confirm the rating for your exact model and application before you order.