Section One
Start with the weight
Almost every bad outcome in drum handling traces back to someone underestimating one number.
Quick answers
- A full 55 gallon steel drum of water weighs nearly 500 lb. Denser products can pass 550 lb.
- Choose a drum handler by the drum it has to grip, steel, plastic or fiber, before you look at capacity.
- EPA 40 CFR 264.175 sizes hazardous waste containment at 10 percent of the total container volume or the volume of the largest container, whichever is greater.
- OSHA 1910.106 requires the nozzle and container to be electrically bonded when you dispense the more flammable liquids.
Water weighs 8.34 lb per gallon, so 55 gallons is 55 × 8.34 = 459 lb before you count the drum. A drum is a quarter-ton object with a high center of gravity, no handholds and contents that slosh. Once it starts to go over, nobody stops it. Every product in this category puts mechanical advantage between a person and that 500 lb.
First question
What are you doing to the drum?
Moving, lifting, tipping, pouring or storing. Different jobs, different machines.
Second question
What kind of drum is it?
Steel, plastic or fiber. This decides which grips will work.
Third question
What is inside it?
If it is hazardous or flammable, regulations shape the purchase.
Please read this part
This guide is educational and reflects the opinion and general experience of CustomMHS as an equipment distributor. It is not a compliance assessment or legal advice. Hazardous waste storage, flammable liquid handling and compressed gas storage are regulated. Confirm your arrangements with your authority having jurisdiction, your fire code and your insurer, and confirm equipment ratings against the manufacturer's data for your model.
Section Two
The drum decides the equipment
Buyers pick a drum handler by capacity and forget to check whether it can hold their drums.
Short answer: Before you order, know whether your drums are steel, plastic or fiber, open or closed head, and whether the rims are undamaged.
Drum types and what they mean for handling
| Drum type |
Empty weight |
What a handler can grip |
Watch out for |
| Steel, closed head |
20 to 40 lb |
A strong rolled rim, plus rolling hoops around the body |
Dented drums stop working with waist grips |
| Steel, open head |
20 to 40 lb |
A removable lid with a locking ring |
Lifting by the ring is only safe if the ring is secured |
| Plastic, with a molded rim |
7 to 10 lb |
The rim, if it is strong enough |
Thin-walled drums flex |
| Plastic, open top |
7 to 10 lb |
The tapered base |
Usually not suited to rim grips |
| Fiber |
Light |
A sturdy lid and rim on heavier grades |
Light grades need a band clamp |
Before you order, answer these four
- Steel, plastic or fiber?
- Open head or closed head?
- Is there a strong rim, and is it undamaged?
- Do you handle more than one type? If so, standardize your drums or buy a handler that covers the range.
Section Three
Grip mechanisms
Four ways to hold a drum, each suited to a different construction.
Short answer: Rim grips suit most steel drums and stronger plastic drums. Waist grips need undamaged steel drums. Base grips are for open-top plastic drums, and band clamps are for light fiber drums.
Grip mechanism compatibility
| Mechanism |
How it holds |
Works with |
Does not work with |
| Rim grip |
Jaws clamp the rim, and the drum's weight tightens them |
Steel drums, open and closed head. Plastic drums with a strong rim. Heavier fiber drums |
Thin or flimsy drums with weak rims |
| Waist grip |
Grips the body |
Steel drums with rolling hoops and a consistent diameter |
Dented or out-of-round drums |
| Base grip |
Curved arms grip the tapered base |
Open-top plastic drums |
Drums with strong rims or closed tops |
| Band clamp |
A strap around the middle |
Lightweight fiber drums |
Heavy loads |
Capacity and grip are separate ratings
A grip has its own working limit, apart from what the lift can raise. Confirm both numbers for your model.
Section Four
Moving drums
Moving a drum across the floor is the most frequent task and the cheapest to solve.
Short answer: Put a dolly under any drum that gets moved short distances. Use a drum truck for longer runs and thresholds.
Drum dollies
A wheeled base the drum sits on. It turns a 500 lb object into something one person can reposition. We list Vestil drum dollies, including a heavy duty dolly and a plastic dolly for wet or chemical areas where steel would rust. The caster advice in our carts guide applies here, and more so, because the load is heavy and concentrated.
Drum trucks
A two-wheeled truck that tilts the drum back onto its wheels, like a hand truck built around a barrel. Better than a dolly over distance and over thresholds. Wesco aluminum drum trucks are lighter to handle and resist corrosion.
The cheapest safety improvement in most facilities
If drums are being walked, rolled or tipped by hand, a dolly under each frequently moved drum costs little against one back injury. People use it, because it makes the job easier.
Section Five
Lifting, rotating and dispensing
Where the drum has to leave the floor, change position, or give up its contents under control.
Short answer: Wesco drum lifts we list carry 650 to 1,100 lb. Choose powered lifting when the same lift happens many times a shift.
Wesco drum lifts we list, 650 to 1,100 lb capacity
| Lift |
Use it for |
| Drum handler lift |
Lifting and positioning. The general-purpose unit. |
| High reach lift |
Upper rack positions and raised dispensing. |
| Power drum lift |
Powered lifting, where lifts happen many times a day. |
| Scale drum lift |
Weighing the contents while lifting, for dispensing by weight. |
Pouring from a drum combines height, weight and a shifting liquid, which is where handling gets dangerous. The MECO Drum Wizard mixes, drains, moves and stores in one unit.
Manual or powered?
Manual equipment costs less and has less to go wrong. Powered pays for itself where the same lift happens many times a shift. Count the cycles before deciding.
Section Six
Storage racks
Getting drums off the floor, organized and reachable.
Short answer: Racks make drums easy to count and inspect, but a rack does not replace spill containment.
Fixed
Hold 30 and 55 gallon drums off the floor in a set position.
Volume
For many drums, tied into the rest of your racking.
Flexible
Storage that follows the work.
Dispensing
A rack and a spill containment sump in one, for drums in active use.
Racked drums still need containment
If the contents trigger the rules in the next section, the rack needs a sump under it or has to sit on a containment platform.
Section Seven
Spill containment and the EPA rule
This section has a real number in it.
Short answer: For hazardous waste containers, the sump must hold the greater of 10 percent of the total container volume or the volume of the largest container. Up to ten 55 gallon drums, that is 55 gallons.
Where containers of hazardous waste are stored, EPA regulation 40 CFR 264.175 sets out the containment system:
- The base must be free of cracks or gaps and able to contain leaks and spills.
- Drainage: the system must be sloped or designed so liquid drains away and containers do not sit in a spill.
- Capacity: "The containment system must have sufficient capacity to contain 10% of the volume of containers or the volume of the largest container, whichever is greater."
Worked examples, in gallons
- Four 55 gallon drums: total 220 gallons. 10 percent is 22 gallons. The largest container is 55 gallons. The sump must hold at least 55 gallons.
- Ten drums: total 550 gallons. 10 percent is 55 gallons, the same as one drum.
- Twenty drums: total 1,100 gallons. 10 percent is 110 gallons, so the sump must hold at least 110 gallons.
- The rule flips at ten drums. Above that, the 10 percent figure governs.
Containers holding only wastes with no free liquids may be exempt under conditions in the regulation. Read it for your wastes.
Do the arithmetic for your layout
Work the rule for the most containers the platform will ever hold, not today's count. State and local rules, your fire code and your insurer may be stricter than the federal rule.
Section Eight
Dispensing flammables safely
Static electricity is the hazard people forget, and OSHA is explicit about it.
Short answer: Bond the nozzle to the container every time, draw liquid through the top or through an approved self-closing valve, and never use air pressure to push it out.
Pouring a flammable liquid builds a static charge. If that charge sparks across the gap between nozzle and container in vapor, it ignites.
Bond the nozzle to the container
OSHA 1910.106(e)(6)(ii) says that Category 1 or 2 flammable liquids, or Category 3 flammable liquids with a flashpoint below 100°F, "shall not be dispensed into containers unless the nozzle and container are electrically interconnected."
The same regulation limits how the liquid is transferred inside a building: only through a closed piping system, from safety cans, by a device drawing through the top, or by gravity through an approved self-closing valve. Transfer by air pressure is prohibited. In practice that means a drum pump through the top, or a drum on a rack with a self-closing faucet.
- Bonding and grounding cables with sound clamps. A corroded clamp on a painted drum makes no connection.
- Self-closing faucets in place of open taps.
- Drum pumps suited to the chemical.
- Containment underneath.
This is a summary, not a compliance program
Flammable liquid handling is governed by OSHA 1910.106, NFPA 30, your local fire code and your insurer. Our cabinets guide covers flammable storage cabinets.
Section Nine
Compressed gas cylinders
A different hazard, the same principle: heavy, unstable upright, and never handled loose.
Short answer: Move cylinders on a cylinder truck with restraints, store them secured and ventilated, and keep stored oxygen 20 feet from fuel gas or behind a rated barrier.
A cylinder is a pressure vessel shaped like something you could roll. Dropped, it can shear a valve. Cylinder equipment moves the weight and keeps the cylinder from falling.
The separation rule the equipment cannot solve
OSHA 1910.253(b)(4) requires oxygen cylinders in storage to be at least 20 feet from fuel-gas cylinders or combustible materials, especially oil or grease, or separated by a noncombustible barrier at least 5 feet high with a fire-resistance rating of at least one-half hour. That is a layout decision.
Good practice also includes keeping valve caps on cylinders not in use, never lifting a cylinder by its cap, and keeping full and empty cylinders apart.
Section Ten
Choosing by application
Find the row that matches your situation.
Short answer: Tell us the drum type, what is inside and what you need to do with it. Those answers specify most of this category.
Drums moved short distances on a smooth floor
Drum dollies. Plastic where corrosion or chemicals are present.
Longer distances or thresholds
Drum trucks.
Lifting onto racks or trucks
A Wesco drum handler lift, or the high reach version.
Lifting many times a shift
A power drum lift.
Dispensing by weight
A scale drum lift.
Contents need mixing
The MECO Drum Wizard.
Dented or out-of-round drums
A rim grip, not a waist grip.
Storing hazardous liquid drums
A spill control platform sized by the EPA rule.
Drums in active use
A combined rack and containment platform. Add bonding and a self-closing faucet for flammables.
IBC totes
IBC containment pallets.
Compressed gas cylinders
A cylinder truck, cylinder pallets and a ventilated cabinet. Then solve separation in the layout.
Section Eleven
Common and costly mistakes
The first two cause injuries. The rest cause findings and rework.
Short answer: The dangerous mistakes are underestimating the weight and handling drums by hand. The costly one is buying a lift that cannot grip your drums.
Underestimating the weight
Nearly 500 lb for a full steel drum of water.
Manual handling that "usually works"
It works until the drum starts to go over.
Buying on capacity without checking the grip
A lift that cannot grip your drums is useless. Check drum type, head type and rim condition first.
A waist grip for damaged drums
Dented or out-of-round drums defeat it.
Sizing containment to today's drum count
Size for the most the platform will ever hold.
Assuming a rack satisfies containment
It needs a sump or a containment platform under it.
Containment that is hard to load
A platform people have to lift drums onto is a platform people skip. Use low profile or fork liftable platforms.
Dispensing flammables without bonding
The failure is ignition, not a citation.
Handling cylinders without restraint
The restraint on a cylinder truck is the safety feature.
Section Twelve
Inspection and maintenance
This equipment holds 500 lb above people's feet.
Short answer: Check grips, hydraulics and restraints on a schedule, keep containment sumps empty, and take damaged equipment out of service.
- Inspect grip jaws for wear, bending and cracks.
- Check hydraulics for leaks and for creeping down under load.
- Test the release at ground level with the unit empty.
- Inspect chains and restraints on cylinder trucks.
- Keep containment sumps empty and clean. A sump holding rainwater or old product has no capacity left.
- Check the sump and base for cracks.
- Inspect bonding cables and clamps.
- Check dolly casters for flat spots and stiff swivels.
- Inspect the drums for corrosion, bulging, dents and damaged rims.
- Take damaged equipment out of service. The workaround is where the injury happens.
Section Thirteen
Frequently asked questions
What comes up most often on quote calls.
How much does a full 55 gallon drum weigh?
Nearly 500 lb for a steel drum full of water: 55 gallons of water is about 459 lb, plus 35 to 40 lb for the drum. Denser products such as oil or syrup can pass 550 lb.
How big does my spill containment need to be?
For hazardous waste containers under 40 CFR 264.175, the greater of 10 percent of the total container volume or the volume of the largest container. Four 55 gallon drums need 55 gallons. Twenty need 110 gallons.
Does the containment base itself have requirements?
Yes. The base must be free of cracks or gaps and able to contain leaks and spills, and the system must be sloped or designed to drain liquid away from the containers.
Why can't my drum handler grip my drums?
Because grip depends on how the drum is built, not on weight. Rim grips need a strong rim, waist grips need undamaged steel drums, base grips are for open-top plastic drums, and band clamps are for light fiber drums.
Do I need to bond and ground when dispensing?
OSHA 1910.106(e)(6)(ii) requires the nozzle and container to be electrically interconnected when dispensing Category 1 or 2 flammable liquids, or Category 3 liquids with a flashpoint below 100°F.
Can I use compressed air to push flammable liquid out of a drum?
No. OSHA 1910.106 prohibits transfer by air pressure. Use a pump drawing through the top or gravity through an approved self-closing valve.
Is a drum rack enough, or do I also need containment?
A rack is not containment. If the contents require containment, the rack needs a sump under it or a containment platform.
Manual or powered drum equipment?
Manual costs less. Powered pays for itself when the same lift or pour happens many times a shift.
What makes a cylinder truck different from a drum truck?
A cylinder truck restrains the cylinder to the frame so it cannot fall. That restraint is the safety feature.
How far apart do oxygen and fuel gas cylinders need to be?
Under OSHA 1910.253(b)(4), oxygen cylinders in storage must be at least 20 feet from fuel-gas cylinders or combustible materials, or separated by a noncombustible barrier at least 5 feet high with a fire-resistance rating of at least one-half hour.
How often should containment sumps be checked?
On a schedule you set and keep. A sump that is partly full of rainwater or old product no longer has its full capacity.
Section Fourteen
Quick-reference tables
Regulatory citations and product families referenced in this guide.
Regulatory requirements
| Requirement |
Figure |
Source |
| Containment capacity |
The greater of 10% of total container volume or the volume of the largest container |
40 CFR 264.175(b)(3) |
| Containment base |
Free of cracks or gaps |
40 CFR 264.175(b)(1) |
| Bonding when dispensing |
Nozzle and container electrically interconnected |
OSHA 1910.106(e)(6)(ii) |
| Transfer inside a building |
Closed piping, safety cans, a device drawing through the top, or gravity through an approved self-closing valve. No air pressure |
OSHA 1910.106(e)(2)(iv)(d) |
| Oxygen from fuel gas or combustibles |
20 ft, or a 5 ft barrier rated one-half hour |
OSHA 1910.253(b)(4) |
Drum weights
| Item |
Weight |
| 55 gallons of water |
About 459 lb |
| Empty steel drum |
20 to 40 lb |
| Empty plastic drum |
About 7 to 10 lb |
| Full steel drum of water |
Nearly 500 lb |
| Full drum of oil or syrup |
Can pass 550 lb |
Product families we list
| Family |
Brand |
Listing |
| Drum lifts |
Wesco |
Handler, high reach, power, scale |
| Mix, drain, move, store |
MECO |
Drum Wizard |
| Drum dollies |
Vestil |
Dollies, heavy duty, plastic |
| Drum trucks |
Wesco |
Aluminum drum trucks |
| Drum racks |
MECO |
Storage racks, portable, pallet racking |
| Spill containment |
Little Giant |
Low profile, fork liftable, carts, IBC |
| Cylinders |
MECO, Little Giant |
Trucks, pallet racks, cabinets |
About the author. Tom McGovern has worked in the industrial material handling industry since 1981, bringing over 45 years of hands-on experience helping businesses select the right equipment for their applications. His expertise includes specifying and quoting Wesco drum lifts, Vestil drum dollies, Little Giant spill containment and MECO cylinder trucks.
Questions about this guide? Call 866-333-0728 to speak with an experienced material handling specialist.