Industrial Equipment Experts Since 1980 | Mon–Fri, 7 AM–6 PM ET
No bots. Real experts. 866-333-0728
Get a Fast Quote
Get a Fast Quote

CustomMHS Buyer's Guide

Lift Tables by Brand

Five brands, five model number conventions, and two of them run in the opposite order. An LPT-020-24 and an S35-024-0025 look like the same table. One is 2,000 lb and the other is 2,500 lb.

Covers: Presto · Autoquip · Bishamon · Lift Products · Blue Giant Questions: 866-333-0728 Written and reviewed by: Tom McGovern · November 2026
Section One

What this guide adds

And what it leaves to the guide next door.

Quick answers
  • Autoquip, Presto and Blue Giant put travel first in the model number. Lift Products and Bishamon put capacity first. S35-024-0025 is 24 in of travel and 2,500 lb. LPT-020-24 is 2,000 lb and 24 in of travel.
  • Duty cycle decides whether a lift lasts. The brands publish it in different units, so count your busiest hour and ask.
  • Know your power before you shop: 115V single phase, 230V or 460V three phase, shop air, or none.
  • For self-leveling positioners, choose spring for one steady load weight and air for loads that vary.
  • Compare quotes on the full configuration. Travel limit switches, skirting and toe guards are options on some models.

Our Lift Tables and Pallet Positioners guide covers the engineering decisions: collapsed height, rolling loads, platform size, end loading against side loading, and ANSI MH29.1. If you have not made those decisions, start there.

This guide starts where that one stops. It covers the five brands and their model numbers: how to read a part number, what each brand publishes, and where published specifications look comparable and are not. To browse the range, see heavy-duty scissor lift tables.

Please read this part

This guide is educational and reflects the opinion and general experience of CustomMHS as an equipment distributor. It is not an engineering specification or a compliance assessment. Brand figures are the manufacturers' published catalog and listing data and can change. Confirm the current data sheet for your exact model before you order.

Section Two

Reading a model number

The section that prevents the most common cross-shopping mistake.

Short answer: Find out whether the brand puts travel or capacity first before you compare two part numbers.

S35-024-0025   versus   LPT-020-24
Autoquip S35-024-0025
24 in travel, then 2,500 lb. Travel first.
Lift Products LPT-020-24
2,000 lb, then 24 in travel. Capacity first.

Both contain the digits 24 and a number near 20. They are different machines and they are read in opposite order.

How each brand builds its part numbers
Brand Pattern Order Worked example
Autoquip S35-[travel]-[capacity ÷ 100] Travel first S35-060-0150 is 60 in travel, 15,000 lb
Presto [series][travel]-[capacity ÷ 100] Travel first, except the XZ floor level series XL36-50 is 36 in travel, 5,000 lb
Blue Giant LFT[travel]-[capacity ÷ 100]-[platform] Travel first LFT36-40-4872 is 36 in travel, 4,000 lb, 48 in by 72 in
Lift Products LPT-[capacity ÷ 100]-[travel] Capacity first LPT-045-36 is 4,500 lb, 36 in travel
Bishamon L[capacity in hundreds]K-[platform]-[voltage] Capacity first L44K-TT4448-480 is 4,400 lb, 44 in by 48 in turntable top, 480V
Presto floor level models read differently

On the Presto XZ floor level family, the first digits are the platform width in inches, not the travel. In XZ44-20, the 44 is a 44 in wide platform and the 20 is 2,000 lb. Check which family you are reading before you decode it.

Bishamon capacity codes

The 22K, 44K and 66K in a Bishamon part number are 2,200 lb, 4,400 lb and 6,600 lb. When you compare a Bishamon to a 2,000 lb or 4,000 lb table from another brand, the Bishamon is the slightly larger machine at each step.

What the letters mean
Brand Letters Meaning
Autoquip -LP, -EN, -EW, -DL Low profile, extra narrow, extra wide, double long
Presto W, 3W, 4W, 4.5W Wide base, with the number giving the base width in feet
Presto D, Z, T, F, P Double scissor, floor level, tilt, foot pump, hand pump
Bishamon TT Turntable top, followed by the platform size in inches
Lift Products 3W, 4W, U, E, SG, LS Wide base in feet, U-Lift, E-Lift, stainless or galvanized, Lift-N-Spin
Autoquip double long capacities are not round numbers

The -DL models carry capacity codes such as 0064, 0096 and 0128, which are 6,400 lb, 9,600 lb and 12,800 lb. Do not round them to 6,000 or 10,000 when you compare quotes. See Autoquip Series 35 Double Long.

Section Three

The five brands at a glance

Where each one sits, from published catalog data.

Short answer: Autoquip covers the heavy end, Presto the most formats, Bishamon the clearest electrical options, Lift Products low profile and floor level, and Blue Giant standard duty and zero ground level.

Published ranges by brand
Brand Capacity Lowered height Where it stands out
Autoquip 500 to 24,000 lb 5 in and up The heavy end and the deepest catalog from one brand
Presto 500 to 12,000 lb 3/8 in to 10 in The most formats: electric, foot pump, hand pump, air, floor level, tilt
Bishamon 440 to 6,600 lb 2.9 in to 12.5 in Each voltage published as its own part number, and cycle ratings published by model
Lift Products 440 to 10,000 lb 3-1/8 in and up Low profile and floor level, and a published motor specification
Blue Giant 2,000 to 6,000 lb standard duty 7.5 in to 10 in, and 3/8 in on the zero ground level model Standard duty and zero ground level

Between 2,000 lb and 6,000 lb all five brands compete directly. That is where most buyers are, and where the model number confusion in section two does its damage. If your load sits near the edge of a brand's range, ask us instead of assuming the brand does not go there.

Section Four

Duty cycle

Capacity tells you whether the lift can raise the load once. Duty cycle tells you whether it can do it all day for years.

Short answer: Count the lift cycles in your busiest hour. Under about ten, a standard intermittent-duty lift is fine. At fifteen or more, ask about a heavier duty build.

The motor is the part that wears, and it is sized to a duty assumption. The brands publish that assumption in different units, so the figures below are separate statements, not a ranking.

Published duty figures, in each manufacturer's own units
Brand Published figure
Autoquip Standard scissor lifts designed for 100,000 cycles per year on an intermittent cycle
Bishamon Alpha L22K and L44K rated at 50,000 cycles per year, L66K at 35,000 cycles per year
Lift Products Intermittent duty, able to run 15 minutes of every hour
Presto Service documentation gives 15 cycles per hour as the maximum before overheating
Blue Giant Ask us

Worked example: turning your hour into a year

Cycles per year
Station Math Cycles per year
10 cycles an hour, one 8 hour shift, 250 days 10 × 8 × 250 20,000
15 cycles an hour, two shifts, 250 days 15 × 16 × 250 60,000
30 cycles an hour, two shifts, 250 days 30 × 16 × 250 120,000

The first station is comfortable on any of these brands. The second is past a 50,000 cycle rating and at the hourly limit two brands publish. The third needs a lift built for it.

Intermittent and continuous duty

Intermittent duty lifts are for work with defined cycles and rest between them: a workstation where a person raises a pallet, works on it and lowers it. Continuous duty lifts are built for sustained high-frequency use, such as a lift under a conveyor discharge. Nearly everything in this category is intermittent duty, which is the right and economical choice for a workstation. If the lift is part of an automated line, say so, and have the duty rating confirmed in writing for the exact model.

Section Five

Power and voltage

The power at the station is usually fixed by the building, so settle it early.

Short answer: Tell us the voltage and phase at the station. If there is no power, look at foot pump, hand pump, air or spring units.

Published electrical options
Brand What is published
Bishamon 115V, 230V single phase, 230V three phase and 480V three phase, each as its own part number, with 24V controls
Lift Products 1.5 HP motor in 115/230V single phase or 230/460V three phase, with 115V controls. The Guardian series uses a 1 HP motor with 24V controls
Presto 115V single phase is standard on the listings. Service documentation lists 120V and 240V single phase and 208 to 230V and 460V three phase motors
Blue Giant 1 HP internal power unit, 115V single phase, on the standard duty listings
Autoquip Ask us at quote time

Options that need no electricity

Air units have a second advantage. With no hydraulic oil there is no chance of an oil leak onto the product, which often decides it in food, pharmaceutical and clean assembly work.

Section Six

Travel and capacity by brand

Where comparable models land.

Short answer: At the same nominal size, the brands differ by fractions of an inch in lowered height and by a few hundred pounds in capacity. Compare the lowered and raised heights, not the names.

Representative published models. Heights are lowered to raised
Model Brand Capacity Lowered to raised Platform
S35-024-0025 Autoquip 2,500 lb 6.5 in to 30.5 in 24 in by 36 in
LFT24-20-2436 Blue Giant 2,000 lb 7.5 in to 31.5 in 24 in by 36 in
LPT-020-24 Lift Products 2,000 lb 7 in to 31 in 24 in by 36 in
XL24-20 Presto 2,000 lb 7-1/4 in to 31 in 24 in by 36 in
L22K-3153 Bishamon 2,200 lb 8.5 in to 38.5 in 31 in by 53 in
XL36-50 Presto 5,000 lb 7-1/4 in to 43 in 24 in by 48 in
LPT-045-36 Lift Products 4,500 lb 7.25 in to 43 in 24 in by 48 in
S35-060-0150 Autoquip 15,000 lb 12.5 in to 72.5 in 32 in by 90 in
L66K-TT4444 Bishamon 6,600 lb 12.5 in to 51 in 44 in by 44 in turntable
DXS30-10 Presto 1,000 lb 6-3/4 in to 36-3/4 in 16 in by 24 in

Worked example. Travel is raised height minus lowered height. The S35-024-0025 goes from 6.5 in to 30.5 in, so 30.5 − 6.5 = 24 in of travel, which is the 024 in its part number.

Lowered height follows travel more than capacity

Autoquip publishes the same 2,500 lb capacity at 6.5 in lowered on a 24 in travel model and 8 in lowered on a 60 in travel model. If you need a low lowered height, look first at how much travel you are asking for, then at the low profile and floor level formats in section eight.

Going higher than one scissor reaches

A single scissor runs out at about 60 in of travel. Above that, the Presto double scissor series reaches 86 in raised and the Autoquip Compact series is published to 94 in raised. Autoquip and Lift Products also publish taller multi-stage ranges. Ask us if you need more than the listed heights.

Section Seven

Platform size and wide base families

A pallet on a narrow table is a stability problem, not a fit problem.

Short answer: A wide base family is a different machine underneath. An oversized platform on a standard base loses edge capacity.

Wide base and special footprint families
Brand Family What it changes
Presto Wide Base: X3W, X4W, X4.5W Base width of 3 ft, 4 ft or 4-1/2 ft
Lift Products LPT3W, LPT4W Base width of 3 ft or 4 ft
Autoquip Extra Wide and Extra Narrow Widens or narrows the Series 35 footprint
Autoquip Double Long Two scissor assemblies end to end under one long platform, for capacity, stability and side load rating
Blue Giant Platform size in the part number The last digits give platform width and length

Capacity assumes the load sits over the center of the platform. Extend the platform and the same load near an edge puts a much larger force on the scissor. The lift tables guide gives the rule: about 2% of edge-load capacity for each inch beyond the minimum platform size. If the load is bulky and light, an oversized platform is the lower cost route. If it is bulky and heavy, the wide base family is the right answer.

Section Eight

Low profile, floor level and pits

Three answers to the same problem.

Short answer: If a pallet jack loads the lift, lowered height is the whole specification. Floor level models lower to 3/8 in.

Standard

Lowered 5 in to 12-1/2 in

Loaded by fork truck, or by pallet jack with a ramp. The lowest cost per pound of capacity.

Low profile

Lowered about 2.9 in to 5 in

Autoquip low profile at 5 in, Lift Products Guardian at 3-1/4 in, and Bishamon low profile down to 2.9 in. A pallet jack gets on over a short ramp.

Floor level

Lowered 3/8 in to 3-1/8 in

Blue Giant zero ground level at 3/8 in, Presto floor level at 3/8 in, and Lift Products U-Lift at 3-1/8 in. The jack rolls on with no ramp and no pit.

A pit is the traditional way to get a lift flush with the floor. It is expensive and permanent. In a leased building, or anywhere the layout may change, a floor level lift usually wins. Pits are still an option: Presto publishes that its floor level lifts can be set in a pit so the platform sits flush when lowered.

Know what a U-Lift is

The U-shaped platform lets a pallet jack straddle the lift instead of driving onto a solid deck. It only works with pallets. If the station also handles containers or loose product on a solid deck, choose a different format.

Section Nine

Positioners: spring or air

A self-leveling positioner keeps the top of a stack at working height with no controls.

Short answer: One product at one case weight is a spring application. Several products at different weights is an air application.

No power, no air

Spring

Heavy springs carry the load, with a dampener to stop bounce. Nothing to plumb or wire. A spring unit is tuned to a load range by the number of springs, so a change in product weight means retuning.

Shop air

Air

An air bag or captive air system carries the load. It handles loads that vary in weight without retuning, and it uses no hydraulic oil.

Published positioner ranges
Model Brand Type Capacity Lowered to raised
P3-Spring Presto Spring 4,500 lb 9-1/2 in to 28 in
LPSL-44 Lift Products Spring 440 to 4,400 lb 9.5 in to 28 in
LPSL-44-Air Lift Products Air 440 to 4,400 lb 9.5 in to 28 in
P3-AA Presto Air bag 400 to 4,500 lb 9-1/2 in to 27-3/4 in
EZ X Loader Bishamon Captive air 400 to 2,600 lb self-leveling, 4,000 lb maximum 9.8 in to 29.8 in
PL4 Blue Giant Air 400 to 3,500 lb self-leveling, 4,000 lb maximum 10.5 in to 33.5 in
AL30 AccuLoad Presto Air, 80 psi 1,500 lb lifting, 3,000 lb holding 9-7/8 in to 30-1/4 in
Read both capacity numbers on air units

Several air positioners publish a self-leveling range and a separate maximum. The self-leveling range is the band where the unit adjusts itself. The maximum is what it holds safely. A load above the self-leveling range sits on a unit that has stopped leveling.

Spring is not always the lower price, so compare the quotes. If you need a positioner that runs on electric power instead of shop air, confirm the type in writing before you order.

Section Ten

Turntables and tilt

Removing the walk around the pallet and the reach into the bottom of the bin.

Short answer: Add rotation when people walk around a pallet. Add tilt when people reach down into a container.

Rotation

A portable floor turntable is a good trial. Put it in a station for a week and see whether operators use the rotation before you specify it into a run of lifts.

Tilt

Tilting brings the contents of a container into reach, so nobody bends into the bottom of the box. The Presto-Lifts stationary container tilters publish a tilt of up to 89 degrees and hold the container at any angle in that range. Have the container dimensions ready when you ask, because the container shape decides which angle puts the contents in reach.

Section Eleven

Portable and mobile lifts

When the lift has to go to the work.

Short answer: A mobile lift cart trades capacity and travel for mobility. For heavy loads, a stationary lift plus a pallet truck is usually the better pair.

A mobile scissor lift cart is a lift table on a wheeled base, from hand-pump carts to battery units. The Autoquip Series 35 Rover is the mobile member of the Series 35 family. Bishamon, Lift Products and Presto publish manual and battery carts as well.

Where a stationary table in this category reaches 24,000 lb, mobile carts mostly sit at 2,000 lb and below. Our mobile lift equipment guide covers carts and stackers.

Section Twelve

Safety features by brand

Which protections are standard, which are options, and who publishes what.

Short answer: Order the maintenance prop with the lift, and compare quotes with the safety items matched.

Published safety features
Feature What it does Who publishes it
Maintenance prop or bar Holds the platform up mechanically while someone works underneath Blue Giant maintenance bar and blocks, Lift Products maintenance bars and blocks, Bishamon maintenance pins
Velocity fuse or flow control Stops an uncontrolled descent if a hose fails Autoquip velocity fuses and flow control valve, Bishamon flow-limiting valves, Lift Products flow valve and check valve
Safety perimeter or trip bar Stops descent on contact Lift Products Guardian safety perimeter, Blue Giant trip bar on all four sides
Toe guard or skirting Closes the gap under the platform Blue Giant 6 in toe guard on the zero ground level model. Bishamon and Autoquip skirting as options
Upper travel limit Stops the platform at the top of travel Standard on some Lift Products models, an option on some Presto models
Structural safety factor Margin between rated load and structural failure Autoquip publishes a minimum 3 to 1 structural factor
Standard or option?

Two lifts that match on capacity and travel can differ once the safety items are matched. Compare quotes on the full configuration, and keep the maintenance prop fixed to the lift so it cannot be borrowed and lost.

Section Thirteen

Standards, and who cites what

The brands differ in how much they publish.

Short answer: The standard for this equipment is ANSI MH29.1. If your purchasing process needs documented conformance, ask for it in writing before you order.

Standards cited by brand
Brand Standards published
Autoquip ANSI MH29.1, NFPA 70, ASTM A36, ANSI Z535, AWS D1.1 and applicable parts of OSHA 29 CFR 1910
Bishamon ANSI MH29.1, with UL or CSA certified electrical components
Lift Products States that the Guardian series meets US ANSI and EU safety standards
Presto Service documentation cites ANSI Z535.4 for safety signs and labels
Blue Giant Ask us
No citation does not mean no conformance

A manufacturer that does not list standards on a web page may still build to them. Ask for the documentation you need.

Section Fourteen

Servicing a lift safely

A scissor lift stores energy and holds a load overhead. That is what lockout rules are for.

Short answer: OSHA 1910.147 applies to servicing where unexpected start-up or release of stored energy could injure someone. Lower or block the platform and lock out the power.

29 CFR 1910.147(a)(1)(i) covers the servicing and maintenance of machines where unexpected energization, start-up or release of stored energy could cause injury. Under 1910.147(a)(3)(i), the employer must establish a program and use procedures to apply lockout or tagout devices and otherwise disable the equipment.

On a lift table that means:

  1. Remove the load.
  2. Lower the platform fully, or secure it on the maintenance prop if the work needs it raised.
  3. Relieve hydraulic or air pressure before opening a line.
  4. Disconnect and lock out the power.
  5. Follow the manufacturer's service manual for the model.

The lift tables guide covers the ANSI MH29.1 maintenance sequence.

Section Fifteen

Choosing by application

Find the row that matches your situation.

Short answer: Decide the load, lowered height, power and cycles first. Then pick the brand that publishes what you need.

Heavy loads, 8,000 lb and up
Autoquip Series 35 and its double long and extra wide families.
2,000 to 6,000 lb at a workstation
All five brands compete here. Compare lowered and raised heights and the safety items included.
You need a specific voltage
Bishamon publishes each voltage as its own part number. For other brands, tell us the voltage and phase.
No electric power at the station
A Presto foot pump or hand pump table, or an air or spring positioner.
Pallet jack loading
Blue Giant zero ground level, Presto floor level, or a Lift Products U-Lift for pallets.
Hand stacking, one product weight
A spring positioner.
Hand stacking, varying weights
An air positioner. Check the self-leveling range.
High cycle counts or an automated line
Ask for a continuous or heavier duty build and get the rating in writing.
Food or clean assembly, no oil near product
An air unit with no hydraulic oil.
People walk around the pallet
A turntable top lift or a floor turntable.
Purchasing needs documented standards
Autoquip and Bishamon publish the most. Ask for documents from any brand.
Section Sixteen

Common and costly mistakes

Most come from comparing two quotes that are not the same machine.

Short answer: Decode the part number, match the configuration, and count the cycles.

Reading a capacity-first number as travel-first

LPT-020-24 is 2,000 lb. S35-024-0025 is 2,500 lb.

Rounding Bishamon and Autoquip double long capacities

4,400 lb is not 4,000 lb, and 6,400 lb is not 6,000 lb.

Ignoring duty cycle

Count the busiest hour, not the average.

Finding out about voltage after the order

Check the power at the station first.

Comparing base models

Match the travel limit switch, skirting, toe guard and maintenance prop.

Buying a spring positioner for varying loads

Nobody removes springs between runs.

Reading the maximum instead of the self-leveling range

Above the range, the unit stops leveling.

Putting a U-Lift where containers sit on a solid deck

It works with pallets only.

Section Seventeen

Frequently asked questions

The questions buyers ask when comparing brands.

How do I read an Autoquip Series 35 model number?

Travel comes first, then capacity divided by 100. S35-024-0025 is 24 in of travel and 2,500 lb. S35-060-0150 is 60 in of travel and 15,000 lb. Suffixes -LP, -EN, -EW and -DL mean low profile, extra narrow, extra wide and double long.

How do I read a Lift Products model number?

Capacity comes first, then travel. LPT-020-24 is 2,000 lb with 24 in of travel, and LPT-045-36 is 4,500 lb with 36 in of travel.

How do I read a Presto model number?

On the lift table series, travel comes first and then capacity divided by 100. XL36-50 is 36 in of travel and 5,000 lb. On the XZ floor level series the first digits are the platform width in inches.

Why are Bishamon capacities 2,200, 4,400 and 6,600 lb?

The 22K, 44K and 66K codes in the part numbers are 2,200 lb, 4,400 lb and 6,600 lb. At each step the Bishamon is slightly larger than a 2,000, 4,000 or 6,000 lb table from another brand.

What is duty cycle on a lift table?

It is how often the lift can cycle without overheating or wearing early. Autoquip publishes 100,000 cycles per year for standard lifts, Bishamon 35,000 to 50,000 cycles per year on Alpha models, and Lift Products 15 minutes of run time per hour.

How many cycles per hour is too many for a standard lift?

Under about ten cycles in the busiest hour, an intermittent-duty lift is fine. At fifteen or more, ask about a continuous or heavier duty build.

What voltage do lift tables use?

It depends on the brand and model. Published options include 115V single phase, 230V single phase, and 230V, 460V or 480V three phase. Tell us what is at the station.

Spring or air positioner?

Choose spring when one product at one case weight runs through the station. Choose air when weights vary, because an air unit adjusts without retuning.

What is the lowest a lift table goes?

Floor level models from Blue Giant and Presto lower to 3/8 in, so a pallet jack rolls on without a ramp or a pit.

Which brands cite ANSI MH29.1?

Autoquip and Bishamon cite ANSI MH29.1 in their published material. Ask for conformance documents from any brand if your purchasing process needs them.

Is a maintenance prop included?

Several brands build one into the lift. Where it is a separate item, order it with the lift and keep it fixed to the machine.

Section Eighteen

Quick-reference tables

The decoder and the questions to settle before you ask for quotes.

Part number order
Brand Order Example
Autoquip Travel first S35-060-0150 is 60 in travel, 15,000 lb
Presto Travel first, except the XZ floor level series XL36-50 is 36 in travel, 5,000 lb
Blue Giant Travel first LFT36-40-4872 is 36 in travel, 4,000 lb, 48 in by 72 in
Lift Products Capacity first LPT-045-36 is 4,500 lb, 36 in travel
Bishamon Capacity first L44K-TT4448-480 is 4,400 lb, 44 in by 48 in turntable top, 480V

Have these ready when you call

  • Load weight, and whether it rolls on.
  • Platform size needed.
  • Lowered height needed, and how the load arrives.
  • Raised height needed.
  • Cycles in the busiest hour.
  • Voltage and phase at the station, or shop air.
  • Safety items required: prop, skirting, toe guard, travel limit.
  • Any standards your purchasing process requires.
Before you order

Brand figures here are published catalog and listing data. Confirm the capacity, heights, duty rating, voltage and included safety items on the quote for the exact model.

About the author. Tom McGovern has worked in the industrial material handling industry since 1981, bringing over 45 years of hands-on experience helping businesses select the right equipment for their applications. His expertise includes specifying and quoting Autoquip, Presto, Bishamon, Lift Products and Blue Giant lift tables.

Questions about this guide? Call 866-333-0728 to speak with an experienced material handling specialist.

Ready for a quote?

Send us these details and a material handling specialist will reply, typically within one business day.

  • Dimensions
    Size of the load and the space it goes in
  • Load
    Weight per item, shelf or level
  • Quantity
    How many units you need
  • Delivery ZIP code
    For freight pricing
  • Drawing
    A sketch, photo or spec sheet, if you have one
Get a Fast Quote Call 866-333-0728

Send us the part numbers you are comparing

We will decode them, match the configurations and tell you where they differ. Quotes are reviewed by material handling specialists, typically within one business day.

866-333-0728

Browse scissor lift tables at custommhs.com

No bots. No guesswork. Real experts.

Sources

ANSI MH29.1 · OSHA 29 CFR 1910.147 · Autoquip, Presto, Bishamon, Lift Products and Blue Giant published catalog, service and listing data.

Disclaimer. This guide is educational content and reflects the opinion and general experience of CustomMHS. It is not an engineering specification or a compliance assessment. Brand figures are published data and can change. Confirm capacity, heights, duty rating, voltage and safety equipment on the quote for the exact model. Reviewed November 2026.