What Is a Driver Cage? Controlling Dock Door Access Without Slowing Deliveries
A driver cage is a small wire enclosure just inside a dock or entry door. Drivers and vendors come in, check in and wait there, and go no further.
Written and reviewed by: Tom McGovern, owner of CustomMHSPublished: November 2026Covers: WireCrafters driver and building access cagesQuestions: 866-333-0728
Section One
What is a driver cage?
Also called a building access cage or dock door security cage.
Short answer: A driver cage is a wire mesh enclosure built around the inside of a personnel or dock door. It lets drivers and vendors enter the building and hand over paperwork while keeping them out of forklift lanes and away from inventory.
Quick answers
What it does: Keeps visitors out of forklift traffic and away from stock, and gives you one place to check credentials.
Why it does not slow deliveries: A service window with a shelf lets paperwork pass through, so the driver never has to leave the cage.
Sizes: From 3 ft 4 in. square up to 8 ft 6 in. x 8 ft 4 in.
Layouts: Two-wall for a corner, three-wall against a flat wall.
Without a cage, the door a driver walks through opens straight onto your floor. With one, the driver is inside, out of the weather, and visible, and the next door is one your staff controls.
A note on this guide
This guide is written from published manufacturer data and my own experience quoting this equipment. It is general guidance and my opinion, not engineering advice. Confirm the rating for your exact model and application before you order.
Section Two
How it works at the door
Three parts do the job.
Short answer: The cage surrounds the entry door. A service window handles paperwork. A second, staff-controlled door leads into the building.
The enclosure
Wire walls around the entry door
Built from the same heavy duty wire partition system as a security cage. Open mesh keeps the driver visible and lets light and air through.
The service window
With a shelf for paperwork
Bills of lading and signatures pass through the window. Your receiving clerk stays on the warehouse side.
The inner door
Hinged, 3 or 4 ft wide
A pedestrian door for staff access, locked from the warehouse side. A Dutch door pass-through is also published as an option.
Benches are available so drivers can sit while they wait: the MTB-4, MTB-6 and MTB-8 are 4, 6 and 8 ft long.
Section Three
Sizes and models
The model number tells you the layout and the size.
Short answer: MT2 is a two-wall cage and MT3 is a three-wall cage. The two digits are width and depth in feet.
Driver cage models
Model
Layout
Size
MT2-33HD
2-wall
3 ft 4 in. x 3 ft 4 in.
MT3-33HD
3-wall
3 ft 4 in. x 3 ft 4 in.
MT2-46HD
2-wall
4 ft 4 in. x 6 ft 4 in.
MT3-56HD
3-wall
5 ft 6 in. x 6 ft 4 in.
MT2-88HD
2-wall
8 ft 6 in. x 8 ft 4 in.
MT3-88HD
3-wall
8 ft 6 in. x 8 ft 4 in.
Published widths are 3 ft 4 in., 4 ft 4 in., 5 ft 6 in., 6 ft 6 in., 7 ft 6 in. and 8 ft 6 in. Depths are 3 ft 4 in., 4 ft 4 in., 6 ft 4 in. and 8 ft 4 in. The 3 ft 4 in. wide cage takes a 3 ft hinged door. All the others take a 4 ft door.
Worked example: floor area
The smallest cage is 3 ft 4 in. square. That is 3.33 x 3.33 = about 11 sq ft, room for one person standing. The largest is 8 ft 6 in. x 8 ft 4 in., which is 8.5 x 8.33 = about 71 sq ft, more than six times the floor area. Price rises much more slowly than floor area, so if several drivers arrive together, the larger cage is good value.
Section Four
Two-wall or three-wall?
It depends on where the door is.
Short answer: A two-wall cage fits a door near a corner and uses two building walls. A three-wall cage fits a door in the middle of a wall.
Layout by door location
Door location
Cage
Building walls used
Near an inside corner
2-wall (MT2)
Two
In the middle of a flat wall
3-wall (MT3)
One
The two-wall cage has fewer panels, so it costs less for the same floor area. If you are laying out a new dock office or moving a door, putting the visitor entrance near a corner saves money on the cage.
Section Five
Choosing the size
Count the people and what they do while they wait.
Short answer: Size the cage for the most drivers who wait at the same time, plus a bench if waits are long.
One driver at a time, quick paperwork
3 ft 4 in. square, two-wall or three-wall.
Two drivers, or one with a hand truck
4 ft 4 in. x 6 ft 4 in. or 5 ft 6 in. x 6 ft 4 in.
Several drivers, or long waits
8 ft 6 in. x 8 ft 4 in. with a bench.
Door near a corner
MT2 two-wall.
Door in a flat wall
MT3 three-wall.
Staff also use this door
Add a coded or card lock on the inner door so staff pass through without a key.
Short answer: The usual errors are undersizing the cage and forgetting about exit requirements.
Sizing for one driver when three arrive together. A cage that holds one person backs the rest up outside.
Blocking an exit. The cage sits in an exit path. Check egress requirements with whoever handles your building code compliance before you lock an inner door.
Service window on the wrong side. Put the window where the clerk already works.
Not checking the floor. Panels mount to the floor with supplied concrete anchors. Uneven slabs need attention at installation.
Expecting the cage to replace a process. A cage controls where visitors go. It still needs a procedure for who lets them in.
A driver cage is a wire mesh enclosure built around the inside of a dock or entry door. Drivers and vendors can enter and hand over paperwork without getting access to the warehouse floor.
Why do warehouses use driver cages?
To keep drivers and vendors out of forklift lanes and away from inventory, and to give one controlled place to check credentials.
What sizes do driver cages come in?
WireCrafters driver cages run from 3 ft 4 in. square up to 8 ft 6 in. x 8 ft 4 in., in two-wall and three-wall layouts.
What is the difference between a two-wall and a three-wall driver cage?
A two-wall cage fits in a corner and uses two building walls. A three-wall cage sits against one flat wall.
Does a driver cage slow down deliveries?
It should not. A service window with a shelf lets paperwork pass through while the driver stays in the cage.
Can drivers sit down in a driver cage?
Yes. Benches are available in 4, 6 and 8 ft lengths.
About the author. Tom McGovern is the owner of CustomMHS, an industrial material handling distributor serving the US, Canada and Mexico. He has worked in material handling since 1981 and has quoted and specified the WireCrafters driver and building access cages sold at CustomMHS. Questions about this guide: 866-333-0728.
Ready for a quote?
Send us these details and a material handling specialist will reply, typically within one business day.
✓Dimensions Size of the load and the space it goes in
✓Load Weight per item, shelf or level
✓Quantity How many units you need
✓Delivery ZIP code For freight pricing
✓Drawing A sketch, photo or spec sheet, if you have one
Tell us the door location, how many drivers wait at once and where your receiving desk is, and we will recommend a model. Quote requests are answered within 24 hours by a real person.
CustomMHS wire partitions guide, WireCrafters Style 840 guide and driver cage listings · WireCrafters published specifications.
Published figures are current as of November 2026 and are subject to change by the manufacturer. This guide is written from published manufacturer data and my own experience quoting this equipment. It is general guidance and my opinion, not engineering advice. Confirm the rating for your exact model and application before you order.
Business Deliveries
Standard Business Delivery (With Loading Dock) Delivery to a commercial address with a loading dock.
Business Delivery (No Dock, Forklift Available) Delivery to a commercial address with no dock, but a forklift is available on-site.
Business Delivery (No Dock, Liftgate Required) No dock or forklift on-site. Liftgate service is needed. Liftgate lowers items to ground level.
Business Delivery (No Dock, Manual Unloading) Delivery to a commercial location without a loading dock or equipment.
Limited Access Business (With Loading Dock) Delivery to a restricted-access site (e.g., government, schools, military, farm) with a dock.
Limited Access Business (No Dock, Forklift Available) Delivery to a restricted-access site (e.g., government, schools, military, farm) with no dock but a forklift is available on-site.
Residential Deliveries
Home Delivery is available with a $300 minimum product order. Orders below $300 will include an adjustment to bring the product total to the $300 minimum.