Section OneWhich wire shelving finish do you need?
Choose by moisture first, then by budget.
Short answer: Chrome is for dry rooms only. Epoxy is for coolers, freezers and humid rooms. Stainless is for sterile rooms, cleanrooms and washdown.
Quick answers- Chrome: Dry storage only. NSF listed for dry environments only.
- Epoxy: Walk-in coolers, freezers and high humidity. 15 year rust warranty.
- Stainless 304 or 316: Sterile environments, cleanrooms and sterile processing. Most durable and most expensive.
Wire shelving is popular because air and light pass through it and it reconfigures without tools. None of that helps if the finish is wrong for the room. Chrome in a walk-in cooler is the single most common wire shelving mistake.
A note on this guideThis guide is written from published manufacturer data and my own experience quoting this equipment. It is general guidance and my opinion, not engineering advice. Confirm the rating for your exact model and application before you order.
Section TwoThe finishes one at a time
What each finish is and where it fails.
Short answer: Each step up in corrosion protection costs more. Buy the finish the room requires and no more.
Chrome
The classic bright finish, with a protective lacquer over it. It is the lowest cost and the right choice for stockrooms, dry goods and general warehouse use. In a damp room it can rust under the lacquer where you cannot see it until it breaks through.
Green epoxy
An epoxy coating made for walk-in coolers, freezers and high-humidity rooms. It carries a 15 year rust warranty.
Grey epoxy
The same protection and the same 15 year rust warranty as green, in a color meant for customer-facing areas.
Stainless steel, type 304 and type 316
The most durable metal wire option and the most expensive. Type 304 is usually sufficient. Type 316 adds molybdenum and resists chlorides, so it is the one for salt, bleach and aggressive cleaners. See our cleanroom and stainless guide for more on stainless equipment.
Wire shelving finishes compared| Finish | Environment | Published note | Relative cost |
|---|
| Chrome | Dry storage only | NSF listed for dry environments only; protective lacquer | $ |
| Green epoxy | Coolers, freezers, high humidity | 15 year rust warranty | $$ |
| Grey epoxy | Same as green, customer-facing areas | 15 year rust warranty | $$ |
| Stainless 304 / 316 | Sterile rooms, cleanrooms, sterile processing | Most durable metal wire option | $$$$ |
Section ThreeWhen polymer beats every wire finish
If corrosion is the whole problem, look past wire.
Short answer: Polymer shelving cannot rust and its shelf mats lift off for washing. It is the alternative to stainless in wet and cold rooms.
Metro polymer lines| Line | Capacity per shelf | Corrosion warranty | Relative price |
|---|
| MetroMax i | 2,000 lb | Lifetime | Highest |
| MetroMax 4 | 800 lb | Lifetime | Mid |
| MetroMax Q | 800 lb | 20 years | Economical |
Polymer shelf mats are removable, which matters where shelves are washed on a schedule. For constant washdown or a room that never dries out, compare the price of stainless wire with polymer before deciding.
Section FourChoosing by room
Find the row that matches where the shelving goes.
Short answer: If the room is ever wet or cold, chrome is out.
Dry stockroom, warehouse, parts room
Chrome.
Walk-in cooler or freezer
Green epoxy, or polymer.
High-humidity room, dish room, laundry
Epoxy or polymer.
Retail or customer-facing area that is damp
Grey epoxy.
Cleanroom, sterile processing, lab
Stainless 304. Use 316 where chlorides are present.
Washdown with bleach or salt exposure
Stainless 316, or polymer.
Food storage on the bottom shelf
Any suitable finish, with the bottom shelf at least 6 in. off the floor per FDA Food Code guidance.
Section FiveCapacity, sizing and a worked example
The finish does not change the load rating. The unit does.
Short answer: Metro wire shelving is rated up to 800 lb per shelf evenly distributed and up to 2,000 lb per unit.
Both limits apply. Five shelves at 800 lb each would be 4,000 lb, which is double the 2,000 lb unit limit. On a five-shelf unit the working figure is 2,000 / 5 = 400 lb per shelf if every shelf is loaded equally.
Super adjustable posts let you reposition shelves in 1 in. increments. Standard posts use fixed grooves. If you need more than 800 lb per shelf, MetroMax i polymer is rated 2,000 lb per shelf, and the steel shelving lines in our industrial shelving guide go higher.
Mobile unitsA unit on casters carries its own rating. Ask for the mobile rating, not the stationary one.
Section SixCommon mistakes
Each of these shows up as rust within a year or two.
Short answer: Chrome in a damp room is the big one. Mixing finishes in one unit is the next.
- Chrome in a cooler. It is listed for dry environments only.
- Mixing finishes. A chrome post under an epoxy shelf rusts at the post. Match every part.
- Assuming all stainless is the same. Type 304 is not immune to chlorides. Use 316 around salt and bleach.
- Reading only the shelf rating. The 800 lb shelf rating and the 2,000 lb unit rating both apply.
- Overbuying. Stainless is the most expensive wire option. In a dry room it buys you nothing.
Section SevenFrequently asked questions
The questions I hear most on quote calls.
Can chrome wire shelving go in a walk-in cooler?
No. Chrome wire shelving is NSF listed for dry environments only. Use epoxy-coated or polymer shelving in coolers and freezers.
What is the difference between chrome and epoxy wire shelving?
Chrome is a bright plated finish with a protective lacquer for dry rooms. Epoxy is a coating made for coolers, freezers and humid rooms and carries a 15 year rust warranty.
When do I need stainless steel wire shelving?
In sterile environments, cleanrooms and sterile processing, and anywhere the shelving is washed down with aggressive cleaners.
What is the difference between 304 and 316 stainless shelving?
Type 316 adds molybdenum and resists chlorides such as salt and bleach. Type 304 is usually sufficient otherwise.
How much weight does wire shelving hold?
Metro wire shelving is rated up to 800 lb per shelf evenly distributed and up to 2,000 lb per unit. Both limits apply.
Is green epoxy different from grey epoxy?
The protection and the 15 year rust warranty are the same. Grey is intended for customer-facing areas.