Industrial Equipment Experts Since 1980 | Mon–Fri, 7 AM–6 PM ET
No bots. Real experts. 866-333-0728
Get a Fast Quote
Get a Fast Quote

CustomMHS Buyer's Guide

Shelving with Modular Drawers

The model names look like noise. They are not. Every segment of a Rousseau part number is a decision. This guide breaks it down, explains how a drawer bank and shelf levels share one frame, and settles when drawers in shelving beat a drawer cabinet.

Covers: Rousseau R5S modular drawer shelving · six series · 36 in, 42 in and 48 in wide Questions: 866-333-0728 Written and reviewed by: Tom McGovern · November 2026
Section One

What this guide adds

Two other guides come at this product from either side. This one covers the hybrid.

Quick answers
  • This is a shelving frame with a bank of Rousseau drawers built in. Each drawer is rated at 400 lb and extends 100%.
  • The part number tells you the unit. R5SEC-754809A is shelving, 36 in wide, 18 in deep, 75 in high, a 48 series drawer bank, variant 09, add-on.
  • Overall height minus the drawer bank is the room left for shelves. A bigger bank means fewer shelf levels.
  • Shelf ratings run from 575 lb to 800 lb per shelf depending on the series, and they do not rise with unit size.
  • Listed drawer heights are 3 in, 4 in and 6 in. If you need drawers taller than 8 in, look at the R-Series cabinets.

Our cabinets and modular drawer guide covers drawers inside a closed cabinet. Our industrial shelving guide covers shelf ratings, fire code and anchoring. This guide covers the product in between: a shelving frame with a drawer bank in it. You are buying two capacity systems in one frame, described by one part number.

The decoder

One key reads the part number

Every segment of R5SEC-754809A is a decision. Section three breaks it down.

The arithmetic

Bank height against shelf levels

A 75 in frame with a 48 in bank has less room for shelves than the same frame with an 18 in bank.

The decision

Same drawers, two frames

These are the same 400 lb drawers as the R-Series cabinets. Section nine covers which frame to buy.

Please read this part

This guide is educational and reflects the opinion and general experience of CustomMHS as an equipment distributor. Every Rousseau figure here is taken from the CustomMHS listings. Unit total capacity, anchoring and fire protection depend on your configuration and building. Confirm the current data sheet for your exact model before you order.

Section Two

What the product is

Drawers hooked into a shelving frame.

Short answer: The drawers are the product and the frame is the host. Rousseau says the drawers also hook into more than 35 other shelving brands.

The listings describe it this way: the drawers are installed in Rousseau Spider shelving, and can also be installed in over 35 brands of shelving systems with a quick hook-on assembly. That lets you keep shelving you already own and add high-density drawer storage to it.

If you already have shelving

Ask us about a drawer bank fitted into your existing frames before you price complete units. Tell us the brand, width and depth of your shelving.

Open or closed

Confirm on the quote whether the unit has side and back panels. It changes the look, the dust protection and the amount of solid surface, which matters for the sprinkler question in section eleven.

Names you will see

Rousseau Modular Drawer Shelving, the Modular Drawer Shelving System, and Spider shelving all refer to this product.

Section Three

Decoding the part number

Eight segments, each one a decision.

Short answer: Read left to right: family, frame, width, depth, height, drawer bank, variant, and A for add-on.

R5 · S · E · C - 75 · 48 · 09 · A
R5
The Rousseau product family
S
Shelving with drawers. An A here is an R-Series drawer cabinet
E, G or H
Width: E is 36 in, G is 42 in, H is 48 in
C or E
Depth: C is 18 in, E is 24 in
75 or 87
Overall height in inches
18, 36 or 48
The drawer bank code
01 to 11
Which drawer mix fills the bank
A
Add-on unit that shares uprights with its neighbor. No letter means a starter

Worked example. R5SEC-754809A is shelving, 36 in wide, 18 in deep, 75 in high, with a drawer bank in the 48 series, variant 09, as an add-on. Note that E means 36 in as a width and 24 in as a depth. The position decides which.

Width and depth letters in shelving and in R-Series cabinets
Letter In shelving (R5S) In cabinets (R5A) Same meaning?
E Width 36 in, or depth 24 in Width 36 in, or depth 24 in Yes
H Width 48 in Width 48 in Yes
C Depth 18 in Depth 18 in, and also width 24 in In the depth position
G Width 42 in Depth 27 in No

So R5SEC and R5AEC are the same 36 in by 18 in footprint in two frames, but G means different things in the two lines. Decode within one line at a time, and confirm the dimensions on the listing. Our Rousseau R-Series guide covers the cabinet numbers.

The bank code is a code, not always a measurement

Bank codes are 18, 36 and 48. On the 4809 models, the listings show a 30 in drawer bank plus one front access roll-out shelf in that 48 in space. If you are counting inches of drawers, read the drawer bank height on the listing. Do the same for overall height, and use the listed figure for clearance checks.

Section Four

The six series

Three widths and two depths.

Short answer: Width sets drawer width and footprint. Depth changes drawer volume, the shelf rating, how far a drawer reaches into the aisle, and stability.

The six series, as listed
Width by depth Prefix Capacity per shelf
36 in by 18 in R5SEC 800 lb
36 in by 24 in R5SEE 625 lb
42 in by 18 in R5SGC 650 lb
42 in by 24 in R5SGE 650 lb
48 in by 18 in R5SHC 575 lb
48 in by 24 in R5SHE 600 lb
  • Width: 36 in is the most compact and suits tight shop and tool room positions. 42 in and 48 in give wider drawers for larger parts.
  • Depth: 18 in suits most tool room positions. 24 in gives more volume per drawer for longer parts.
  • Drawer height: shallow drawers suit flat tooling, inserts and gauges. Deeper drawers suit fittings and taller parts.
Depth is the decision with the most consequences

An 18 in deep unit at 75 in or 87 in high is over the 4 to 1 height to depth ratio. A 24 in deep unit at either height is under it. See section ten.

Section Five

Bank against shelves

One frame, two storage systems.

Short answer: Subtract the drawer bank height from the overall height. What is left is for shelves.

Overall height − drawer bank height = space left for shelf levels
75 in frame, 18 in bank
75 − 18 = 57 in for shelves. R5SEC-751801 lists five shelves
87 in frame, 18 in bank
87 − 18 = 69 in. R5SEC-871801 lists six shelves
75 in frame, 48 in bank
75 − 48 = 27 in. R5SEC-754805 lists four shelves

Shelves adjust at every inch, so the levels above the bank can be re-spaced.

Many small parts, tooling, inserts, gauges
Trade toward the drawer bank.
Boxed stock, overflow, anything large
Keep the shelf levels.
A mix, which is most tool rooms
Small, often-picked items in the bank at a comfortable height, bulk on the shelves above.
Not sure yet
Start with a smaller bank. It is the easier choice to change later.
Put the bank where hands are

The drawers get touched most, so they belong between knee and chest height. A loaded drawer pulled out high in the frame is also the worst case for stability.

The roll-out shelf. The 4809 models list one front access roll-out shelf with a 30 in drawer bank. It suits items too large for a drawer that still need to come out to the aisle.

Section Six

400 lb per drawer, and what it does not mean

The headline figure, and three things it is not.

Short answer: Each drawer is rated at 400 lb and extends fully. That is not a unit total and it is not comparable to a shelf rating.

Not a unit total

You cannot multiply it

Ten drawers at 400 lb do not make a 4,000 lb unit. The frame, the uprights and the floor govern. Ask for the unit total in writing.

Not a shelf rating

A different measurement

A drawer rating includes the slides and applies with the drawer pulled out. A shelf rating is an evenly spread load on a supported surface.

Not a slide spec

Ask if you need it

If your application needs the slide type or its details, ask us for the manufacturer's data.

The listings publish 100% drawer extension. Full extension is the point of the product: it turns a deep drawer into a tray that shows all of its contents. The listings also state that a lifetime warranty covers the Rousseau drawer rolling mechanism. Note the scope: the rolling mechanism, not the whole unit.

If the 400 lb figure is not shown on the listing for the model you are quoting, have it confirmed on the quote.

Section Seven

Capacity per shelf

Listed for every series, and it does not rise with size.

Short answer: The 36 in by 18 in series is rated highest at 800 lb per shelf. The 48 in by 18 in series is lowest at 575 lb. Read the figure for your series.

Listed capacity per shelf
Series Prefix Capacity per shelf
36 in by 18 in R5SEC 800 lb
36 in by 24 in R5SEE 625 lb
42 in by 18 in R5SGC 650 lb
42 in by 24 in R5SGE 650 lb
48 in by 18 in R5SHC 575 lb
48 in by 24 in R5SHE 600 lb

The smallest unit is rated highest. Going deeper at 36 in wide lowers the rating from 800 lb to 625 lb. Going deeper at 48 in wide raises it from 575 lb to 600 lb. You cannot infer the shelf rating from the size of the unit.

The usual shelf rules apply: the rating is for an evenly spread load, a point load is harsher, and the sum of the shelf ratings is not the unit total. The drawer bank loads the same frame at the same time. Our industrial shelving guide covers those rules.

Ask for the unit total

Drawers plus shelves plus frame, and what that puts on the floor. On a tall unit with a 48 in bank and loaded shelves it is a large number, and a mezzanine or upper floor needs to know it.

Section Eight

Drawer heights and compartments

A narrower range than the cabinets, which decides some purchases.

Short answer: The listings show 3 in, 4 in and 6 in drawers. Confirm an 8 in drawer on the quote. For taller drawers, use an R-Series cabinet.

Drawer heights on the shelving listings are 3 in, 4 in and 6 in. An 8 in drawer appears on some series pages, so if you need one, have the drawer mix confirmed in writing for the exact model. The R-Series cabinets hold the same 400 lb drawers in heights up to 14 in.

Measure your tallest drawer item first

If something that belongs in a drawer is taller than the drawers offered here, a cabinet is the answer for that item. If everything fits in 3 in to 6 in drawers, the shelving line gives you shelf levels the cabinets do not.

Listed compartments per drawer, by series and drawer height
Series Footprint 3 in drawer 4 in drawer 6 in drawer
R5SEC 36 in by 18 in 24 24 8
R5SEE 36 in by 24 in 30 30 12
R5SGC 42 in by 18 in 18 18 12
R5SGE 42 in by 24 in 30 30 12
R5SHC 48 in by 18 in 32 32 10
R5SHE 48 in by 24 in 40 40 15

A 3 in and a 4 in drawer divide the same way within a series. A 6 in drawer has fewer, larger compartments.

Section Nine

Drawers in shelving, or a drawer cabinet

Same drawers, two frames.

Short answer: Choose shelving with drawers when you need shelf levels too. Choose a cabinet when everything goes in drawers, or you need tall drawers or a locked, enclosed unit.

Which frame
Choose drawer shelving when Choose an R-Series cabinet when
You need drawers and shelves in one footprint Everything you store belongs in a drawer
Your drawer items fit in 3 in to 6 in drawers You need drawers taller than 8 in
You want storage up to 75 in or 87 in high You want a counter-height unit with a work surface
You already own shelving the drawers can hook into You need a fully enclosed, locking unit
The mix of drawers and shelves may change The drawer layout is settled

Our cabinets guide and R-Series guide cover the cabinet side.

Section Ten

Stability, anchoring and aisle space

A tall, shallow unit with heavy drawers that pull out needs attention.

Short answer: Units 18 in deep are over 4 to 1 at both heights, so plan to anchor them or pair them back to back. Allow aisle room for a fully extended drawer.

Height to depth ratio
Unit Math Ratio
75 in high, 18 in deep 75 ÷ 18 4.2, over 4 to 1
87 in high, 18 in deep 87 ÷ 18 4.8, over 4 to 1
75 in high, 24 in deep 75 ÷ 24 3.1
87 in high, 24 in deep 87 ÷ 24 3.6

The 4 to 1 figure is common shelving guidance. Follow Rousseau's installation instructions for anchoring, and remember that a loaded drawer pulled out shifts weight forward. Keep the bank low, load heavy items in the lower drawers, and open one drawer at a time.

Worked example: aisle space

A drawer at 100% extension comes out about as far as the unit is deep. For a 24 in deep unit, plan for about 24 in of open drawer plus room for a person to stand, about 30 in. That is roughly 54 in, or 4 ft 6 in, of clear space in front of the unit. For an 18 in deep unit it is about 48 in.

Section Eleven

Fire protection

Solid shelves and closed units block sprinkler water.

Short answer: Tell your fire protection contact the unit depth, height, aisle width and whether the shelves and sides are solid.

NFPA 13 treats storage as shelf storage up to 30 in deep, with aisles at least 30 in wide, up to 15 ft high. These units are 18 in or 24 in deep and 75 in or 87 in high, which is inside those dimensions. Solid shelves and enclosed units still block sprinkler water, and large numbers of them can matter. Our industrial shelving guide covers the rules. Ask before you buy in quantity.

Section Twelve

What to ask for in writing

The listings give sizes, shelf counts, drawer mix and ratings. These items are worth confirming.

Short answer: Confirm the drawer mix, open or closed sides, the unit total capacity, anchoring, and whether a drawer bank can go into your existing shelving.

Confirm with your quote
Item Why
Drawer bank height and drawer mix for the exact model The bank code is not always the drawer height
Any 8 in drawer Confirm it for the specific model
Open or closed sides and back Dust protection and fire protection
Unit total capacity Floor loading, mezzanines
Anchoring hardware and instructions Units 18 in deep are over 4 to 1
Starter or add-on An add-on shares uprights and cannot stand alone
Drawer bank for existing shelving Tell us your shelving brand and size
Lead time and freight These ship by truck
Section Thirteen

Common and costly mistakes

Most come from reading the part number too quickly.

Short answer: Do not multiply the drawer rating, do not assume bigger units have stronger shelves, and do not order add-ons to stand alone.

Multiplying 400 lb by the number of drawers

The unit total is a separate number. Ask for it.

Assuming a bigger unit has a higher shelf rating

The 36 in by 18 in series is the highest at 800 lb.

Reading the bank code as inches of drawers

The 4809 models have a 30 in drawer bank and a roll-out shelf.

Carrying cabinet letters into shelving numbers

G is 42 in wide in shelving and 27 in deep in cabinets.

Ordering an add-on to stand alone

It shares uprights with a starter.

Buying for a tall item that needs a taller drawer

Measure the item first.

Putting the bank at the top of an 87 in frame

Keep drawers in easy reach and low for stability.

Skipping anchors on 18 in deep units

They are over 4 to 1.

Section Fourteen

Frequently asked questions

What buyers ask before ordering.

What is Rousseau modular drawer shelving?

It is a shelving frame with a bank of Rousseau drawers built into it. You get drawers for small parts and shelf levels for larger items in one unit.

How do I read a Rousseau R5S part number?

R5 is the family, S is shelving, then width (E is 36 in, G is 42 in, H is 48 in), depth (C is 18 in, E is 24 in), overall height (75 or 87), drawer bank code (18, 36 or 48), the drawer mix variant, and A for an add-on unit.

How much does each drawer hold?

The listings rate each drawer at 400 lb, with 100% extension.

How much does each shelf hold?

It depends on the series: 800 lb for 36 by 18, 625 lb for 36 by 24, 650 lb for 42 by 18 and 42 by 24, 575 lb for 48 by 18 and 600 lb for 48 by 24.

What is the total capacity of a unit?

It is not the drawers and shelves added together. The frame and floor govern. Ask for the unit total in writing.

What drawer heights are available?

The shelving listings show 3 in, 4 in and 6 in drawers. Confirm an 8 in drawer for the exact model. R-Series cabinets offer drawers up to 14 in high.

What is the difference between a starter and an add-on?

A starter stands alone. An add-on, marked with an A at the end of the part number, shares uprights with the unit next to it.

Can the drawers go into shelving I already own?

Rousseau states the drawers can be installed in over 35 brands of shelving. Tell us your shelving brand, width and depth and we will check.

Should I buy drawer shelving or a drawer cabinet?

Choose drawer shelving when you need shelf levels as well as drawers. Choose a cabinet when everything goes in drawers, you need tall drawers, or you need a fully enclosed locking unit.

Does the unit need to be anchored?

Units 18 in deep are over the 4 to 1 height to depth ratio at both 75 in and 87 in, so plan to anchor them or pair them back to back. Follow Rousseau's installation instructions.

What does the warranty cover?

The listings state a lifetime warranty on the Rousseau drawer rolling mechanism.

Section Fifteen

Quick-reference tables

The decoder and the series on one screen.

The decoder
Segment Meaning
R5 Rousseau family
S Shelving with drawers
E, G, H Width 36 in, 42 in, 48 in
C, E Depth 18 in, 24 in
75, 87 Overall height in inches
18, 36, 48 Drawer bank code
01 to 11 Drawer mix
A Add-on unit
The six series
Width by depth Prefix Capacity per shelf
36 in by 18 in R5SEC 800 lb
36 in by 24 in R5SEE 625 lb
42 in by 18 in R5SGC 650 lb
42 in by 24 in R5SGE 650 lb
48 in by 18 in R5SHC 575 lb
48 in by 24 in R5SHE 600 lb
Before you order

Confirm the full part number, the drawer mix, starter or add-on, and the unit total capacity on the quote.

About the author. Tom McGovern has worked in the industrial material handling industry since 1981, bringing over 45 years of hands-on experience helping businesses select the right equipment for their applications. His expertise includes specifying and quoting Rousseau modular drawer shelving in 36 in, 42 in and 48 in widths.

Questions about this guide? Call 866-333-0728 to speak with an experienced material handling specialist.

Ready for a quote?

Send us these details and a material handling specialist will reply, typically within one business day.

  • Dimensions
    Size of the load and the space it goes in
  • Load
    Weight per item, shelf or level
  • Quantity
    How many units you need
  • Delivery ZIP code
    For freight pricing
  • Drawing
    A sketch, photo or spec sheet, if you have one
Get a Fast Quote Call 866-333-0728

Tell us what goes in drawers and what goes on shelves

The tallest drawer item, the bulk items for the shelves, and the floor space. We will match the series and the drawer bank. Quotes are reviewed by material handling specialists, typically within one business day.

866-333-0728

Browse Rousseau modular drawer shelving at custommhs.com

No bots. No guesswork. Real experts.

Sources

NFPA 13 · Rousseau figures as published on CustomMHS product listings.

Disclaimer. This guide is educational content and reflects the opinion and general experience of CustomMHS. Every Rousseau figure is taken from the CustomMHS listings and should be confirmed on your quote. Unit total capacity, anchoring and fire protection depend on your configuration and building. Reviewed November 2026.